Best sellers
There are 16462 products.
Li-Po battery with a rated voltage of 3.7 V and a capacity of 800 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP503448
Board compatible with Arduino, based on ATmega328P. Equipped with an area with prototype holes, a breadboard, 12 LEDs, a button and a buzzer. Cytron MAKER-UNO-X
Module with 13 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4153
32-bit microcontroller with ARM Cortex-M0 core + Access line ultra-low-power, 32 pins, 16kB Flash, 2kB RAM, 512B EEPROM, ADC, LQFP, temperature range -40 to 85 ° C, STMicroelectronics, RoHS
Module with 11-channel AS7341 sensor that allows to detect light in different wavelength ranges (color detection). It communicates via the I2C interface. Waveshare AS7341 Spectral Color Sensor
Set of 5 diamond coated needle files with a working length of 70 mm. Yato YT-6156
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466
Set of 10 diamond coated needle files, working length 50 mm. Yato YT-6151
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C (Qwiic). SparkFun SEN-15440
Set of 10 diamond-coated needle files with a working length of 25 mm. Yato YT-6145
Set of 10 diamond coated needle files, working length 50 mm. Yato YT-6144
Precision screwdriver with a hardened, sand-blasted, magnetic tip.
Multimeter that allows you to measure DC voltage up to 1000 V, AC voltage up to 750 V, DC current up to 10 A and resistance. The meter is equipped with a diode and transistor tester and a buzzer
Uninterruptible power supply module for Raspberry Pi Pico, which allows you to continue work and safely shut down the microcomputer after a power failure. Waveshare Pico-UPS-A-EN
Module with digital temperature sensor TMP117. It enables temperature measurement in the range from –55°C to 150°C with very high accuracy up to ± 0.1°C. The system communicates via the I2C interface. SparkFun SEN-15805
DC-DC Step-Down converter module AP63203 with an output voltage of 3.3 V, an input voltage of 3.8 to 32 V and a maximum output current of 2 A. SparkFun COM-18356
A-Star 328P Micro is a small board based on ATmega 328PB microcontroller (Flash, 32 KB, SRAM, 2.5 KB, EEPROM, 1KB, 12 MHz). The system has a loaded bootloader compatible with Arduino. The board has 24 I / O ports (of which 9 pins can be used for PWM outputs and 8 pins for analog inputs). Supply voltage 3.8 ... 15 V. The board works with 3.3 V voltage. Pololu 3163
A-Star 328P Micro is a small board based on ATmega 328PB microcontroller (Flash, 32 KB, SRAM, 2.5 KB, EEPROM, 1KB, 8 MHz). The system has a loaded bootloader compatible with Arduino. The board has 24 I / O ports (of which 9 pins can be used for PWM outputs and 8 pins for analog inputs). Supply voltage 3.8-15 V. The board works with 3.3 V voltage. Pololu 3162
A-Star 328P Micro is a small board based on ATmega 328PB microcontroller. The system has a loaded bootloader compatible with Arduino. The board has 24 I / O ports . The circuit board works with 5 volts logic voltage. Polol 3161
Module with EEPROM 24LC32 memory with a capacity of 32 kBit (4 kB). Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5146