Best sellers
There are 17513 products.
A 16-channel servo driver module designed to work with the M5Stack sets. It is powered with the voltage from 6 to 12 V. M5Stack M014-B
Module with the driver of the resistive touch panel. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5423
Module with WiFi Espressif ESP32-S2. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5000
Module with ToF VL53L4CX sensor with a range of up to 6 m. It is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 5425
The module with a fingerprint sensor FPC1020A is designed for the M5Stack sets. The sensor has a built-in memory and can store up to 150 fingerprints. M5Stack U008
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 2 GB LPDDR4 RAM and 32 GB eMMC. Raspberry Pi CM4002032
Voltmeter module for M5Stack sets. It can measure DC voltage in the range from 0 to 36 V with an accuracy of approx. 0.5 mV. M5Stack U087
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 16 GB eMMC. Raspberry Pi CM4001016
The pad for use with shallow Feather series contains two TB6612 chips that allow you to control DC motors or stepper motors. The I2C interface is used to communicate with the overlay. Adafruit 2927
Module with a PIR motion sensor designed for M5Stack modules. It can detect movement up to 5 meters with a detection angle of 100 degrees. M5Stack U004
Module with laser distance sensor ToF VL53L0X designed for M5Stack sets. It can detect simple hand gestures. M5Stack U010
The USB-C to HDMI cable allows for a direct connection of a monitor to a USB-C port on a laptop or computer, eliminating the need for additional adapters. With a high-performance chipset, it supports resolutions up to 4K at 60Hz, ensuring high image quality and smooth performance. CA-CMHD-10CU-0030-BK
Module with a light sensor (photoresistor) designed for M5Stack sets. An analog output and a digital output have been led out on the Grove connector. M5Stack U021
A module with a joystick designed for M5Stack sets. Returns data from two axes and button state via the I2C interface. M5Stack U024-C
Piergiacomi TR 30 58 D are antistatic pliers for precision cutting of wires up to 1.63 mm in diameter, intended for service and assembly applications in ESD-protected environments. The solid construction and high cutting force ensure reliability during intensive work.
DC-DC step-up/step-down voltage regulator module that stabilizes the output voltage at 6 V with an input voltage range of 2.9 V – 32 V. The circuit automatically increases or decreases the input voltage, allowing it to power devices even when the supply voltage varies significantly. The regulator can deliver up to 2 A output current (when the input voltage is close to the output voltage) and offers a typical 80–90% efficiency, making it suitable for battery-powered systems and embedded projects. Pololu 2575
4.3" IPS LCD display with touch panel. It is equipped with a DSI interface for displaying the image and I2C for operating the touch panel. It offers a resolution of 800x480 pixels. Waveshare 4.3inch DSI LCD
Base board dedicated to Raspberry Pi CM4 modules. Equipped with a 2.8" IPS LCD display and an expander. Waveshare CM4-DISP-BASE-2.8A-Acce-A
SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 2 GB LPDDR4 RAM. Raspberry Pi CM4002000
FeatherWing Proto - Prototyping Add-on For All Feather Boards