Best sellers
There are 16525 products.
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
Snap-Action Switch with 16.3mm Roller Lever: 3-Pin, SPDT, 5A
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 22564
4-digit, 8-segment LED display module with 8-level brightness adjustment. Communication via the I2C interface. DFRobot DFR0645-R
A small LCD panel with the ability to control its transparency. The panel can block up to about 95% of light. Adafruit 3627
The Parallax Feedback 360 ° is a digital servo designed for continuous operation. Standard PWM modeling is used for control. The recommended operating voltage is 6 V, at this voltage the servomotor has a speed of 140 rpm and a torque of 2.5 kg * cm (0.25 Nm). In addition, the servo has a Hall sensor. Pololu 3432
Module with green LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-G
Single board computer with ARM Cortex-A8 AM335x processor, clocked at 1 GHz with 512 MB of RAM. The module has, among others USB interfaces, I / O pins, WiFi and Bluetooth. SeeedStudio 102010048
PROLINE glue gun with a diameter of 11 mm and power of 200 W
Contrast sensor module. It has two integrated operating modes: analog and digital. It has the ability to set the digital mode for color detection. DFRobot SEN0147
The 32L4R9IDISCOVERY kit is a complete demonstration and development platform for STMicroelectronics Arm® Cortex®-M4 core-based STM32L4R9AI microcontroller.
A module with a magnet sensor that allows you to detect the presence of an object emitting a magnetic field in the environment. The module is supplied with the voltage ranging from 3.3 V to 5 V and has a digital output. DFrobot DFR0033
Module with LCD display 16x2 characters with gray backlight. It is supplied with the voltage from 3.3 V to 5 V and communicates via the I2C interface. DFRobot DFR0557
The FS5106R is a standard-sized servo that has been built by FEETECH specifically for continuous rotation, making it an easy way to get your robot moving. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer.
Data logger programmed to automatically record data from GPS and Qwiic series sensors. SparkFun DEV-19426
Module with an analog MQ6 propane sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0131
The S9V11MACMA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.