Best sellers

Servomechanism designed to expand the micro: Maqueen educational robot set with additional moving mechanical elements. The set includes a metal adapter and a set of screws. DFRobot SER0048

The USB-UART converter module with a USB-C connector is a versatile component that uses the CH340N chip to enable communication between the computer and devices using the UART interface, supporting 3.3V and 5V logical voltages, which makes it a universal tool for various applications. HW-234

Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628

Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage

A probe for measuring AC and DC currents up to 650 A. It operates in a bandwidth of up to 400 Hz and can be connected to an oscilloscope via a BNC connector. Hantek CC-650

A probe for measuring AC and DC currents up to 65 A. It operates in a bandwidth of up to 20 kHz and can be connected to an oscilloscope via a BNC connector. Hantek CC-65

Pad dedicated to 3D printing. It has dimensions of 220x220 mm and is covered with a PEI coating on one side

Pad dedicated to 3D printing. It has dimensions of 220x220 mm and is covered with a PEI coating on both sides

Professional pH measurement set with an industrial silver chloride electrode (Ag/AgCl), the measurement in the range from 0 to 14 pH is converted into voltage with a linear characteristic. DFRobot SEN0169-V2

The camera module with the Sony IMX219 sensor works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0153

Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage

USB cable with a 2-pin magnetic connector in a set with a female socket. It has a 2.8 mm pitch, allows you to power devices with a current of 2 A

Module with 6-position DIP switch. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 111020043

Digital oscilloscope with built-in signal generator. It has two measurement channels with 150 MHz bandwidth and a single-channel signal generator with waveform frequencies up to 25 MHz. Hantek DSO2D15

Power cord with a built-in Power Delivery (PD) trigger with a working voltage of 12 V. Has a USB type C connector and a DC plug 5.5x2.5 mm. Length 3 m

Universal EEPROM and Flash serial memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. modCH341set1

Power cord with a built-in Power Delivery (PD) trigger with a working voltage of 15 V. Has a USB type C connector and a DC plug 5.5x2.5 mm. Length 1.2 m

Power cord with a built-in Power Delivery (PD) trigger with a working voltage of 20 V. Has a USB type C connector and a DC plug 5.5x2.5 mm. Length 1.2 m

Set of 2 Panasonic Eneloop R3/AAA rechargeable batteries with 800 mAh capacity and 1.2V voltage. Packaged in eco-friendly packaging (blister). Panasonic BK-4MCDE/2BE

Module with a 3-axis magnetometer BMM150. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020492