Best sellers
There are 15502 products.
KAmodQTR8A is a module with eight photointerrupter sensors KTIR0711S. It allows to detect edge or line. Thanks to the analog outputs, is possible to connect a module to the e.g. comparator. The module can be used in analisze of the floor e.g. by Linefollower vehicles.
The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 80 oz-in (6 kg-cm), 41 g
A 5-inch display with an IPS LCD matrix with 800 x 480 pixel resolution and touch panel. It has a slim and lightweight design. It communicates via DSI (image display) and I2C (touch panel) interfaces. Waveshare 50H-800480-IPS-CT
DC-AC converter, also referred to as an inverter. It converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 110 V, 200 V, 220 V or 280 V
BMS protection module designed for 7 Li-Ion cells. It has a charging function with balancer option and an over-discharge protection function. Dedicated to an electric bicycle or scooter
BMS protection module designed for 10 Li-Ion cells. It has a charging function with balancer option and an over-discharge protection function. Dedicated to an electric bicycle or scooter
Debugger and Programmer for CCxxxx RF System-on-Chip (SoC) devices, CCxxxx RF transceivers, and CC85xx devices with PurePath Wireless Configurator
Tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. Operating voltage range from 0 V to 11 V, built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature. Pololu 2990
BMS protection circuit designed for 4 Li-Ion cells. It has a charging function with balancer option, a discharging function and an over-discharge protection function. HXYP-C47-MA18-4S
P-NUCLEO-IOD02A1 is an STM32 Nucleo kit consisting of NUCLEO-L452RE (IO-Link stack), X-NUCLEO-IOD02A1 (IO-Link physical layer) and X-NUCLEO-IKS02A1 (sensor module). The kit constitutes a full IO-Link device. P-NUCLEO-IOD02A1
A power supply based on a DC-DC converter with a current capacity of up to 5 A. The input voltage can range from 6 V to 36 V, while the output voltage is adjustable from 0.6 V to 36 V. XYS3580
Aluminium heating block dedicated to the MK10 3D printers. Provides effective and even heating of the printing nozzle
Module with 2 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4302
LCD-TFT touchscreen display 3.5 "(420x320 pixels) with LED backlight The display has a built-in ILI9488 controller, designed for Odroid C0, C1 +, C2 and XU4 computers
DC-AC converter, also referred to as an inverter. It converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 220 V, 380 V or 18 V
Panel button, monostable, rectangular, dimensions 16 x 22 mm and SPDT contact configuration
The compact (0.4″ × 0.5″) D24V5F1 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 1.8 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 75% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
Arduino MKR1000 Wifi with Headers
This V2 Rotation Sensor is arduino compatible multi-ring rotation sensor. It is based on multi-turn precision potentiometer. It can rotate upto 10 laps. DFR0058
Digital oscilloscope equipped with a 7" TFT LCD display. It has four measurement channels with a 50 MHz bandwidth, a sampling rate of 1 GSa/s and a 24 Mpts memory buffer. Rigol DS1054Z