Best sellers
There are 16462 products.
White Yato cable tie, dimensions 550x9.0 mm, made of polyamide PA66, offers high tear resistance, excellent mechanical properties and UV protection, ideal for precise fastening and connecting various elements. Yato YT-70637
Module with a 5 mW laser diode displaying a point. It uses a digital signal for control. It can be powered with the voltage of 5 V
The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver
White Yato cable tie, dimensions 500x7.6 mm, made of polyamide PA66, ensuring tear resistance, excellent mechanical properties and UV protection, ideal for accurate connection and fastening of various elements. Yato YT-70635
Akyga® AKY1048 is a high-performance CR2477 lithium battery with a voltage of 3 V and a capacity of 1000 mAh, dedicated to both everyday devices and industrial or IoT solutions. Thanks to its wide operating temperature range, low self-discharge, and durability, the cell serves as an economical and reliable power source for devices requiring long-term operation without interruptions or replacements. It is an ideal choice for manufacturers and users of professional equipment.
A pin expander designed to work with the Raspberry Pi. It provides 2 UART and 8 GPIO interfaces and communicates via the I2C bus. SB Components 14873
The module with the TPL5110 timer, which can generate a signal with an adjustable period from 100 ms to 2 h. It also works well as an external Watchdog Timer. Adafruit 3435
Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 3.5x1.35 mm DC plug
Panel thermometer with a 7-segment LED display with a measuring range from -50 to 110 °C. It is powered with the voltage of 12 V
Tilt sensor module with digital output. Equipped with an XH2.54 connector
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces, in addition, there is an RTC chip on the board, as well as a fan and LCD connector. Waveshare CM4-IO-BASE-C
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
Piezoelectric vibration sensor with analog output, not loaded with mass, can be used as a vibration sensor. LDT0-028K/L
Driver module for two DC brushed motors with current efficiency up to 5 A per channel. It can work with LiPo 2S and 3S packets
Module with IPS LCD display, 1.14" diagonal and 240x135 px resolution. Communication via SPI interface. SB Components 21741
The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. These can be read by almost any 13.56MHz RFID/NFC reader. Adafruit 360
Portable digital oscilloscope with one measurement channel. It offers a frequency bandwidth of 100 MHz and at a sampling rate of 500 MS/s. Fnirsi 5012H
32bit ARM Cortex-M0, 32K Flash, 8K RAM, LQFP48, RoHS
Module with INA237 sensor designed for power monitoring. Allows measurement of voltages up to 85 VDC and current up to 10 A. Uses a 16-bit ADC for precise and accurate readings available via the I2C interface. Adafruit 6340
The Lanberg plug crimper is a universal tool for network installers with the function of crimping RJ-9, RJ-11, RJ-12 and RJ-45 connectors and stripping insulation, equipped with a mechanism to prevent insufficient pressure. Lanberg NT-0201