Best sellers
There are 16756 products.
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
The tester allows you to test Ethernet and telephone cables. Performs basic conduction, short circuit, wire crossing and open circuit tests. Uni-T UT681L
8-port I2C splitter module. The board is equipped with a Gravity connector and allows you to connect additional I2C devices. DFRobot DFR0759
Slotted precision screwdriver 3.0x50mm - YT-25809
Universal PCB designed for mounting on LG-159H. It has prototype fields with a pitch of 2.54 mm for the assembly of THT elements.
Contact IPA Plus contains high purity isopropyl alcohol. Removes all contamination from optical elements. Leaves no traces or stains. AG Termopasty ART.AGT-105
I2C multiplexer module with TCA9548A system. Allows you to connect up to 8 devices. The system works like a gateway - it transmits I2C interface data to one of the 8 main busses. This allows you to connect up to 8 devices with the same address. Adafruit 2717
A converter that ensures easy communication between the RS232/RS485/RS422 interface and RJ45 Ethernet. It supports popular network protocols, including IP, TCP, UDP, DHCP, DNS, HTTP, ARP, ICMP, Websocket and HTTP client, as well as Modbus RTU and Modbus TCP protocols. USR-N520
Protective cover for Li-Po batteries. Used to safely charge, store and transport cells. ToolkitRC Lipo Safety Bag L
AG Gold is a thermal paste with the addition of gold. It has an exceptionally high thermal conductivity (>2.8 W/mK), which is up to three times higher than most traditional products. 3g paste in a syringe. AG Termopasty ART.AGT-106
Momentary button with a diameter of 16 mm and a height of 25 mm. White colour
Extension module designed for Raspberry Pi Pico boards. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5728
The ED-LENS-M12-180780-08 lens can be used with the Raspberry Pi M12 High Quality camera module and other cameras with an M12 interface. This M12 lens with a focal length of 7.8 mm provides a horizontal field of view of 50.3° on 1/1.8" sensors.
Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4831
Detector allowing for non-contact voltage detection. It has two operating modes: low voltage and high voltage for checking three-phase and industrial installations. Uni-T UT12E-EU
The ED-LENS-M12-170500-12 lens can be used with the Raspberry Pi M12 High Quality camera module and other cameras with an M12 interface. This M12 lens with a 5mm focal length provides a 90° horizontal field of view on 1/1.7" sensors.
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °
4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)
The seven-inch touch screen for Raspberry Pi computers has a resolution of 800 x 480, and thanks to the frame and spacers, it is possible to create an integrated device, such as a control panel, based on Raspberry PI. RPI Raspberry Pi Display
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano