Best sellers
There are 16538 products.
Set of 10 pieces hex nuts M2.5 (white galvanized)
Female terminal block, 6-pin. Pitch 3.81mm. Height 7.8mm. Suitable for 15EDGRC male strips with a pitch of 3.81 mm. 2EDGKN-3.81
Programmer-configurator PLD (CPLD and FPGA) from Altera, compatible with Altera USB Blaster Download Cable. It supports Altera JTAG and ISP/ICP interfaces.
HUB with USB 3.2 Gen1 interface designed for industrial use. Equipped with 4 output ports and 2 host input ports with switch. Enclosed in a metal housing. Waveshare USB3.2-Gen1-HUB-2IN-4OUT
The 12V 10W USB Step-Up Converter Module converts 4.2-5.2V input voltage to 12V DC output voltage, with a maximum current of 1A and a conversion efficiency of 96%. The device can operate in a wide temperature range, from -40°C to 85°C, which makes it ideal for powering various electronic devices in harsh environments.
XT60EW-M connector (male plug) with a maximum conduction current of 20 A. Equipped with mounting holes, it will work as a battery connector or power connector in RC models. Amass XT60EW-M
The protection circuit for one Li-Ion cell with a voltage of 3.7 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 6 A
Eccentric spacer with an internal diameter of 5 mm. Allows adjustment of the roller pressure on V-Slot aluminium profiles in 3D printers or CNC machines.
The USB Step-Up 6V 6W converter module converts the input voltage in the range of 4.2-5.2V to a constant output voltage of 12V, with a maximum current of 2A and a conversion efficiency of 96%. The device can operate in a wide temperature range, from -40°C to 85°C, which makes it ideal for powering various electronic devices in harsh environments.
Starter kit with Intel Quark D2000 microcontroller. It offers a 32-bit microcontroller, 6-axis IMU sensor, temperature sensor, USB-UART converter and CR2032 battery socket. The set has connectors compatible with Arduino. Intel Quark Microcontroller Dev Kit D2000
Antenna with an SMA male connector working in the 433 MHz frequency band. It has a gain of 5 dBi and a cable 3 m long. Magnetically attached
Rectangular LED diode 5x2 mm GREEN milk diffused, angle 160 degrees; light intensity 40 mcd (20mA) (2.1V); df 575nm
Expander designed for Wemos D1 Mini boards. Allows you to extend the Wemos pins to additional connectors and connect expansion modules
Momentary button with a diameter of 12 mm and a height of 21 mm. Yellow colour
Board with Atmel ATmega328P microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface