Best sellers
There are 17376 products.
I / O port expander designed for LattePanda V1.0. It provides all GPIO pins so that the set is compatible with the standard Arduino connector and the board does not interfere with other LattePanda ports. DFRobot DFR0491
Switching power supply with a power of 102 W, an output voltage of 12 V and a current of 8.5 A. It has built-in overload and short-circuit protection and a low profile housing. Mean Well LRS-100-12
The module with a color LCD display with a diagonal of 1.14". It has a resolution of 240x135 pixels and an ST7789 controller. Communication with the module is realized via the SPI interface. Waveshare 1.14inch LCD Module
The FS90R is a micro servo that has been built by FEETECH (formerly known as Fitec) specifically for continuous rotation, offering an inexpensive and easy way to get your small turret spinning or miniature robot moving, especially when paired with our 60×8mm wheels designed specifically for this servo. Pololu 2820
15.6" LCD display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 1920x1080 pixels. Waveshare 15.6inch HDMI LCD (for EU)
This ribbon cable allows you to extend all 30 pins on the 2x15 pin male connector to a 2x15 pin female connector. The ribbon cable allows the pins of the 2x15 female connector on the Analog Discovery 2 to be connected directly to the Basys MX3 for easy signal investigation. Digilent 310-100
Gravity: Digital Peristaltic Pump is a peristaltic pump with a controller and a connector compatible with modeling servos. The set is powered by 5 ... 6 V. DFRobot DFR0523
Module with LCD IPS 0.96" display with a resolution of 80x160 px. It communicates via the SPI interface. ModIPSdisp0.96"
Module with 11-channel AS7341 sensor that allows to detect light in different wavelength ranges (color detection). It communicates via the I2C interface. Waveshare AS7341 Spectral Color Sensor
Module with a button, LED diode and a blue cap. DFRobot DFR0029-B
Adafruit 2479 - Bluefruit LE UART Friend - Bluetooth Low Energy (BLE)
This blue case from Arduino is specifically for the Arduino Yun and Arduino Yun with PoE boards. The case has easy access to all board connections. M000008
Starter kit with 10 basic Grove modules and Base Shield V2 extension designed to work with Arduino boards. The user has at his disposal a number of lessons to get to know the possibilities of the set. Seeed Studio 103030375
Universal 45 W Power Delivery power supply with USB type C output, voltage from 5 to 20 V and current from 2.25 to 3 A. Akyga AK-ND-60
Adapter for WS2811 LED strips designed for Teensy 3.2, 3.5, 3.6 and 4.1. It uses the 74HCT245 chip and RJ45 connectors for communication with RGB LED strips. Teensy 3.2-4.1 PJRC OCTO28-ADAPTOR
Fan module with DC motor, propeller and connection cable. DFRobot DFR0332
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
Module with 5 A 250 VAC relay. DFRobot DFR0017
Capacitive proximity sensor with PNP NO output. It can detect the presence of various objects in the range from 1 to 10 mm. The sensor is supplied with the voltage from 6 to 36 V and consumes a current of up to 300 mA. LJC18A3-H-Z/BY