Teensy 3.2-4.1 OctoWS2811 Adapter - adapter for WS2811 LED strips for Teensy
ID: 584993
5906623480715
zł69.90
Tax included
zł56.83 tax excl.
Adapter for WS2811 LED strips designed for Teensy 3.2, 3.5, 3.6 and 4.1. It uses the 74HCT245 chip and RJ45 connectors for communication with RGB LED strips. Teensy 3.2-4.1 PJRC OCTO28-ADAPTOR
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Adapter for WS2811 LED strips designed for Teensy 3.2, 3.5, 3.6 and 4.1. It is equipped with a 74HCT245 buffering system and 100 Ω impedance matching resistors. To connect the module with RGB LED strips, RJ45 connectors and CAT6 Ethernet cable are used, which ensures very high signal quality. The manufacturer has prepared the OctoWS2811 library to operate the LED strips with the adapter.
This adaptor can also be used with the larger Teensy 3.5, 3.6, 4.1 boards using double insulator pins and sockets. Together, these are tall enough to allow the longer board with SD socket to overhang the RJ-45 connectors.
Features
Kit contains
- Teensy 3.2-4.1 OctoWS2811 Adapter
- 4 x screw
584993
You might also like
No product available!
A small module matching the contact plate based on a 32-bit microcontroller with ARM Cortex M7 core. Has a microSD slot. PJRC TEENSY41
zł199.00
24h
Available quantity: 27
Available
Other products in the same category (16)
Audio module designed for Teensy 4.0 and 4.1. It uses the SGTL500 audio codec chip with I2S interface, it can work with a microSD card or SPI Flash memory. Audio Adapter Boards for Teensy 4.x (Rev D)
zł89.43
24h
Available quantity: 18
Available
A development board with the NXP iMXRT1062 microcontroller based on the ARM Cortex-M7 core. It is equipped with a DP83825 PHY Ethernet chip. It can be programmed using any environment and C language or using the Arduino IDE. PJRC TEENSY41_PINS
zł199.90
24h
Available quantity: 7
Available
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE-PINS
zł195.93
24h
Available quantity: 8
Available
A small module based on a 32-bit microcontroller with an ARM Cortex M7 core. It has led out pads with microSD card interface and USB Host. Version with access to a secure software update. PJRC TEENSY40-LOCK
zł149.00
24h
Available quantity: 15
Available
A small module based on a 32-bit microcontroller with an ARM Cortex M7 core. It has a microSD slot and an Ethernet chip. Version with access to secure software updates. PJRC TEENSY41-LOCK
zł199.00
24h
Available quantity: 14
Available
Development board with the NXP iMXRT1062 microcontroller based on the ARM Cortex-M7 core. It can be programmed using any environment and C language or using the Arduino IDE. PJRC TEENSY40_PINS
zł156.68
24h
Available quantity: 28
Available
8 MB PSRAM memory chip, designed for mounting on Teensy 4.1 boards. It enables the expansion of the memory of the microcontroller. PJRC IC-PSRAM-8MB-SOIC8
zł11.92
24h
Available quantity: 33
Available
Ethernet module designed for Teensy 4.1. The board has an Ethernet connector and a 6-pin connector for connecting to Teensy. PJRC ETHERNET-KIT
zł26.20
24h
Available quantity: 14
Available
Module with 4 Qwiic connectors for Teensy boards. Communication via the I2C interface. SparkFun DEV-17119
zł22.15
24h
Available quantity: 1
Available
Teensy Prop Shield is meant for making light and sound effects on small, handheld props and wearable costumes. This shield features a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. PJRC PROP-SHIELD-LC
zł61.16
24h
Available quantity: 1
Available
The adapter allows the Teensy 3.x family to be similar to the Feather family tiles. Thanks to this, it is possible to use a wide range of extensions for Feather tiles. Adafruit 3200
zł38.92
4 weeks
No product available!
Adapter dedicated to Teensy LC, Teensy 3.1 and Teensy 3.2 boards, which allows you to connect Arduino shields to them. SparkFun KIT-15716
zł67.90
24h
Available quantity: 2
Available
Adapter with micro SD card slot. It is equipped with connectors compatible with Teensy LC, 3.0, 3.1, 3.2, 3.5 and 3.6 boards and WIZ820io or WIZ850io Ethernet modules. WIZ820-SD-ADAPTOR
zł45.90
24h
Available quantity: 2
Available
Module with 4 Qwiic connectors for Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Communication via the I2C interface. SparkFun DEV-17156
zł29.43
24h
Available quantity: 6
Available
A small module matching the contact plate based on a 32-bit microcontroller with ARM Cortex M7 core. Has a microSD slot. PJRC TEENSY41
zł199.00
24h
Available quantity: 29
Available
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. Features 10DoF (Degrees of Freedom) motion sensors, 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, 8MB flash memory. DEV-13995
zł179.57
4 weeks
No product available!
Adapter for WS2811 LED strips designed for Teensy 3.2, 3.5, 3.6 and 4.1. It uses the 74HCT245 chip and RJ45 connectors for communication with RGB LED strips. Teensy 3.2-4.1 PJRC OCTO28-ADAPTOR