

zł161.79 tax excl.
A small module based on a 32-bit microcontroller with an ARM Cortex M7 core. It has a microSD slot and an Ethernet chip. Version with access to secure software updates. PJRC TEENSY41-LOCK
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The Teensy 4.1 is a very powerful and powerful microcontroller board with an ARM Cortex-M7 core with an operating frequency of up to 600 MHz. It has a floating point unit, which enables audio and video signal processing and scientific calculations. The board is equipped with large amounts of memory - 7936K Flash, 1024K RAM (512K tightly coupled) and 4K EEPROM (emulated). In addition, it is possible to expand the memory by adding RAM or Flash chips.
The Teensy has multiple communication interfaces, including USB 480 Mbit/s and host USB 480 Mbit/s, 55 digital input/output pins, 35 PWM output pins, 18 analogue input pins, 8 serial ports, 3 SPI, 3 I2C, 2 I2S/TDM ports and 1 S/PDIF digital audio port. In addition, the board supports 3 CAN buses (1 with CAN FD) and 1 SDIO (4 bit) native SD card port. It also features 10/100 Mbit Ethernet with DP83825 PHY and 32 general purpose DMA channels for fast and efficient data transfer. The board also features cryptographic acceleration and a random number generator and RTC for date/time.
Each Teensy 4.1 module has a bootloader preloaded, so it can be programmed using the built-in USB connection. No external programmer is required. Programs can be written in any environment that supports the C language or in the Arduino IDE after installing the Teensyduino extension. In addition, the Teensy 4.1-LOCK version allows the Secure mode to be activated. This allows the code to be sufficiently secure for updates, among other things.
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Teensy Prop Shield is meant for making light and sound effects on small, handheld props and wearable costumes. This shield features a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. PJRC PROP-SHIELD-LC
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. Features 10DoF (Degrees of Freedom) motion sensors, 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, 8MB flash memory. DEV-13995
No product available!
A small module matching the contact plate based on a 32-bit microcontroller with ARM Cortex M7 core. Has a microSD slot. PJRC TEENSY41
Adapter for WS2811 LED strips designed for Teensy 3.2, 3.5, 3.6 and 4.1. It uses the 74HCT245 chip and RJ45 connectors for communication with RGB LED strips. Teensy 3.2-4.1 PJRC OCTO28-ADAPTOR
Teensy Prop Shield is meant for making light and sound effects on small, handheld props and wearable costumes. This shield features a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. PJRC PROP-SHIELD-LC
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE
No product available!
8 MB PSRAM memory chip, designed for mounting on Teensy 4.1 boards. It enables the expansion of the memory of the microcontroller. PJRC IC-PSRAM-8MB-SOIC8
Adapter with micro SD card slot. It is equipped with connectors compatible with Teensy LC, 3.0, 3.1, 3.2, 3.5 and 3.6 boards and WIZ820io or WIZ850io Ethernet modules. WIZ820-SD-ADAPTOR
Ethernet module designed for Teensy 4.1. The board has an Ethernet connector and a 6-pin connector for connecting to Teensy. PJRC ETHERNET-KIT
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE-PINS
Module with 4 Qwiic connectors for Teensy boards. Communication via the I2C interface. SparkFun DEV-17119
Module with 4 Qwiic connectors for Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Communication via the I2C interface. SparkFun DEV-17156
Adapter dedicated to Teensy LC, Teensy 3.1 and Teensy 3.2 boards, which allows you to connect Arduino shields to them. SparkFun KIT-15716
The adapter allows the Teensy 3.x family to be similar to the Feather family tiles. Thanks to this, it is possible to use a wide range of extensions for Feather tiles. Adafruit 3200
No product available!
A development board with the NXP iMXRT1062 microcontroller based on the ARM Cortex-M7 core. It is equipped with a DP83825 PHY Ethernet chip. It can be programmed using any environment and C language or using the Arduino IDE. PJRC TEENSY41_PINS
Teensy 4.1 is the fastest microcontroller with ARM Cortex-M7 600 MHz processor, 55 I/O pins, many communication interfaces, and additional functions such as cryptography and RTC, enabling USB programming. It is equipped with a microSD slot and an additional 8 MB PSRAM memory chip
A small module based on a 32-bit microcontroller with an ARM Cortex M7 core. It has led out pads with microSD card interface and USB Host. Version with access to a secure software update. PJRC TEENSY40-LOCK
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. Features 10DoF (Degrees of Freedom) motion sensors, 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, 8MB flash memory. DEV-13995
No product available!
Audio module designed for Teensy 3.2, 3.5, 3.6 and 4.0. It uses the PT8211 16-bit digital to analog converter (DAC) chip. PJRC PT8211-AUDIO-KIT
A small module based on a 32-bit microcontroller with an ARM Cortex M7 core. It has a microSD slot and an Ethernet chip. Version with access to secure software updates. PJRC TEENSY41-LOCK