Best sellers
There are 16773 products.
Round TFT display with a diagonal of 4" and a resolution of 720x720 pixels. Uses the NV3052C controller. For control, it requires a system with high computing power and an appropriate amount of memory. Adafruit 5793
Module with ACHS-7123 current sensor with a measuring range of direct and alternating current from -30 to 30 A. It communicates via an analog interface. Pololu 4032
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5262
Tamiya 70096 Off-Road Tires (2 tires)
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm
Anthracite R ABS filament with a diameter of 1.75 mm. 0.75 kg of filament is wound on the spool. Fiberlogy R ABS Anthracite
Module with 8-bit ADC and 8-bit DAC. It allows you to measure voltage and generate an analog signal. Communicates via I2C. Adafruit 4648
The expansion module is designed to work with the Raspberry Pi 400. The board has a 40-pin connector placed in a vertical position and a connector for RPI 400 at an angle of 45°. Adafruit 4863
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5241
The battery has a voltage of 18 V. It uses lithium-ion technology and offers a capacity of 1300 mAh. It is compatible with many models of Sthor power tools. Sthor 78987
Raspberry Pi CM5008064 is the most advanced Compute Module 5, equipped with a quad-core Broadcom BCM2712 processor (4 x Cortex-A76) clocked at 2.4 GHz, 8 GB of LPDDR4 RAM, and 64 GB of built-in eMMC storage. This module offers the highest performance and ample data storage, making it an ideal choice for demanding IoT projects, industrial automation, and advanced embedded systems.
Camera module 0.3 Mpx and with OV7251 sensor working with Raspberry Pi. The maximum video resolution is 640 × 480 pixels, without the IR filter. ArduCAM B0206
Camera module designed for minicomputers Raspberry Pi. The camera is equipped with a Sony IMX477 sensor with a lens and an IR-CUT filter. ArduCAM B0270
M.2 M Key to M.2 A Key connector adapter with USB communication support. It allows, among others, to connect modules with M.2 A Key connector to the Raspberry Pi CM4 base board. Waveshare M.2 M KEY TO M.2 A KEY
Module with e-Paper display, 4.2" diagonal and 400x300 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-4.2
Module with IMX298 sensor that works with all versions of the Raspberry Pi. The sensor used has a 16 MP matrix and allows video recording at resolutions 4640x3472/10fps. ArduCAM B0323
Module with 8 Mpx camera with IMX219 sensor and wide-angle lens. Designed for NVIDIA Jetson AGX Orin/Orin Nano/Orin NX and Raspberry Pi Compute Module. ArduCAM B0179
Module with 10 addressable RGB LEDs APA102C. Each of the LEDs is independently controlled via the I2C interface, and the line address is modified, so that the modules can be connected with each other. SparkFun COM-18354