Best sellers

Module with a stepper motor driver based on the DRV8434A system. It allows the bipolar motor to be supplied with current up to 1.2 A per phase and with a voltage from 4.5 V to 45 V. Communication via the SPI interface. Pololu 3769

Module with a stepper motor driver based on the DRV8434A system. It allows the bipolar motor to be powered with a current of up to 1.2 A per phase and can be supplied with the voltage from 4.5 V to 45 V. Pololu 3765

White MattFlex 40D filament with a diameter of 1.75 mm. 0.85 kg of filament is wound on the spool. Fiberlogy MattFlex 40D White

Ionising radiation detector (a.k.a. dosimeter or Geiger counter). It is used to measure the dose of ionising radiation, i.e. the amount of energy that is absorbed by an organism or material during exposure to radiation. It is capable of detecting three types of radiation: X-rays (X-rays), Y-rays and β-rays. Fnirsi GC-01 Blue

The camera is equipped with an IMX708 image sensor dedicated to the Raspberry Pi. It offers a resolution of 12 MPx (4608 x 2592 px) and allows you to obtain very detailed photos and videos. The camera is equipped with an integrated IR-CUT filter and supports HDR technology. ArduCAM B0310

The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3114

The camera is equipped with an IMX708 image sensor. It offers a resolution of 12 MPx (4608 x 2592 px) and allows you to obtain very detailed photos and videos. The camera is equipped with an integrated IR-CUT filter and supports HDR technology. Thanks to the included UVC adapter, it communicates via the USB interface. ArduCAM B0305

Adapter to attach an antenna with RP SMA 50Ω male connector to a device with u.FL socket. SparkFun WRL-18569

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.

Mini HDMI adapter with FFC connector. Designed for prototyping devices with a mini HDMI interface. Waveshare Mini HDMI Adapter Vertical

BMI270 3-axis accelerometer and gyroscope module. The chip is a low-power IMU optimised for wearables, providing precise acceleration measurement, angular velocity measurement and motion-triggered interrupt functions. Equipped with a Qwiic connector, it communicates via an I2C interface. SparkFun SEN-22397

ADH-Tech\'s GT-NUCL1633K1 miniature fingerprint sensor communicates with an external chip via a UART interface. The module has a circular sensor field and takes a 216 x 216 pixel fingerprint image. SparkFun SEN-21210

A small module based on a 32-bit microcontroller with an ARM Cortex M7 core. It has led out pads with microSD card interface and USB Host. Version with access to a secure software update. PJRC TEENSY40-LOCK

USB - UART converter based on the CH9102F chip. Compatible with the voltage of 3.3 V and 5 V, it has been equipped with a USB type C connector. Adafruit 5568

AP3429A DC-DC Step-Down Converter Module with 3.3 V output voltage, 3.9 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21337

Digital multimeter with large display. It can measure AC voltage and DC voltage, AC and DC current, resistance, capacitance, frequency and temperature. Besides, it has functions of diode test, circuit continuity test and NCV test.

Motor with a diameter of 37 mm and a length of 76.5 mm, with a gearbox of 90:1, a working voltage of 12 V, a current consumption from 1.1 A to 6 A, a speed of 160 RPM and a maximum torque of 30 kg*cm. JGB37-550

Motor with a diameter of 37 mm and a length of 76.5 mm, with a gearbox of 131:1, a working voltage of 12 V, a current consumption from 1.1 A to 6 A, a speed of 110RPM and a maximum torque of 19 kg*cm. JGB37-550

The electromagnetic field meter is used to measure electric radiation and magnetic emission. The device is also equipped with a temperature sensor. It also has the function of charging the batteries with a USB cable.

Anemometer with a large, built-in 8-blade fan. Precision anemometer with low starting point, high accuracy and sensitivity.