Best sellers

DC-DC Step-Down converter module AP63203 with an output voltage of 3.3 V, an input voltage of 3.8 to 32 V and a maximum output current of 2 A. SparkFun COM-18356

A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Detection range from 10 to 20 cm, communication via I2C. SparkFun SEN-12787

I2C FRAM breakout board you can add some FRAM storage to your next DIY project. FRAM allows for a lower power usage and a faster write performance. Adafruit 1895

DC-DC Step-Down converter module. It has an input voltage from 3.3 to 45 V, an output voltage of 3.3 V and a maximum output current of up to 3.7 A. Pololu 4891

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.

Adafruit 2342

Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800

Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. It communicates via the I2C interface. Waveshare UV Sensor (C)

The YATO YT-08429 hook set includes four precision tools with a length of 240 mm made of 40Cr steel, intended for service, assembly, and maintenance work. It is used in mechanics, automotive, and construction.

GY-801 is a 9DOF IMU module with L3G4200D, ADXL345, MMC5883MA and BMP180 systems. It allows you to measure the movement of the object and atmospheric pressure.

Module with 16x10 RGB LED matrix display (160 diodes) designed to work with the Raspberry Pi Pico. Communicates via a digital interface. Waveshare Pico-RGB-LED

INEMO system: 3D accelerometer and 3D gyroscope in LGA14L housing by STMicroelectronics

ZD-99 soldering station with a heating power of 48W. Working temperature 150-450 deg. C. The set includes a holder for the flask and a washer with a tip cleaning sponge

The modules are used to operate 7 touch fields. This is possible thanks to the built-in AT42QT1070 capacitive touch sensor. The derived I2C interface serves for communication.

1m USB A-microB USB cable, white-blue cable, flat red plugs illuminated with RGB diode

Expansion module with audio and video outputs dedicated to Raspberry Pi Pico boards. It has a VGA output, SD card slot, audio outputs and control buttons. Pimoroni PIM553

e-Paper display with a diagonal of 13.3" and a resolution of 960x680 pixels. Communicates via the SPI interface. Waveshare 13.3inch e-Paper (K)

The expansion module (shield) is designed for Feather nRF52840 boards. It enables easy connection of 16x32, 32x32 and 64x32 matrix displays. Requires self-assembly. Adafruit 4702

Camera module with 5 MPx matrix, autofocus and CMOS sensor with JPEG output. Based on the Omnivision OV5640 image sensor. ArduCAM B0158

Pololu 5654 is a four-channel JST PH and SH connector adapter for systems based on a 2.54 mm pitch. It facilitates the integration of signal and power wires in prototyping projects and electronic devices where 4-pin connectors are required.