Best sellers

FPC/FFC 8-pin adapter with 0.5mm pitch for DIP holes 2.54mm pitch.

Single point LIDAR based on ToF (Time of Flight) distance sensor with measuring range up to 8 m with a resolution of 1 cm. Thanks to the unique optical construction it can achieve stable, accurate and very sensitive measurement. Benewake TF-Luna

2-channel WiFi switch that can connect and control two household appliances. It allows you to independently turn on / off each of the two connected devices and set time schedules using the EWeLink application. Sonoff Dual

MP3 panel with LCD display for installation in the audio device. It allows you to play files in MP3, WAV and WMA format from USB memory, microSD card, via AUX and Bluetooth 5.0. Has a built-in FM receiver. modBluAudRad

RS422 to TTL converter module based on MAX490 for long-distance bidirectional serial communication, up to 1000 meters, with a transmission speed of up to 2.5 Mbps. Equipped with ESD protection up to 15 kV, TVS diodes and 120 Ω terminating resistors, it provides stability and immunity to interference in demanding industrial conditions. Powered by 5 V, it works with TTL logic and is compatible with popular platforms, and LED indicators facilitate diagnostics and integration.

A solar cell with a power output of 0.7 W and a voltage output of 5.5 V, measuring 95 x 95 x 3 mm, equipped with pads for soldering wires. Ideal for powering small electronic devices in DIY projects.

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252

The 5mm RGB LED with common anode enables the creation of dynamic lighting effects and a wide color palette thanks to the separate control of the three basic colors. Stable operation in a wide temperature range and compact size make it a suitable choice for the construction of lighting installations, signaling, LED decorations, educational and prototyping devices

The X-NUCLEO-IHM11M1 is a low voltage three-phase brushless DC motor driver expansion board based on the STSPIN230 for STM32 Nucleo. It provides an affordable and easy-to-use solution for the implementation of portable motor driving applications such as thermal printers, robotics and toys

Module with CO2, temperature and humidity sensor SCD-41. Equipped with a Qwiic/STEMMA QT connector, it communicates via the I2C interface. Pimoroni PIM587

A sheet of Teflon foil, dimensions 70x100 mm and thickness 0.6 mm. It can be used to make sliders for two-wheeled robots or a knife for computer mice

Programmable standard 17kg * cm servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare SC15 Servo

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5262

STM32 Nucleo expansion board designed to provide an application for the 16 channel LED driver LED1642GW. Depending upon the end application, RGB or single color LEDs can be connected to the board. Separate brightness control is possible for each channel. It is compatible with the STM32 Nucleo board family and equipped the Arduino™ UNO R3 connector layout. X-NUCLEO-LED16A1

The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505

Industrial IoT backplane for Raspberry Pi CM. It uses the SIM7600G-H chip for 4G, 3G, 2G communication, and has a 10/100M Ethernet port with PoE function and a 2.4 GHz WiFi module. Enclosed in an aluminum housing. Waveshare CM-IO-POE-4G-BOX

Electronic load with a maximum power of 25 W and operating voltage up to 25 V. Equipped with smooth load control up to 4 A. FZ25

6-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 21802

The internal WiFi antenna with a 3 dBi gain, supporting 2.4 GHz and 5.8 GHz frequency bands, provides stable wireless connections for devices such as Mini PCI cards, cameras, USB adapters, and network routers. Available with RP-SMA or SMA connectors, it ensures easy integration with a variety of network equipment. Its flexible rubber construction allows for optimal positioning to achieve the best signal.