Order and pay in
for same day shipping
Module with 4 relays controlled by the I2C interface. Each relay can...
USB port isolator based on the ADUM3160 chip with 4 output ports. The...
HDMI/DisplayPort cable, 1.8 m long. Akyga AK-AV-05
5 MP camera with OV5640 sensor and 180° wide-angle lens. OV5640-A28
Microscope lens with adjustable zoom up to 130 times. Can be connected...
USB port isolator with magnetic isolation. The device has a rated...
Virtual keyboard module in the form of a small flash drive. It allows...
Development board with ST Zio and ST morpho connectors, based on the...
The A-Star 32U4 Mini LV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-up/step-down regulator that allows it to be powered efficiently from a 2.7 V to 11.8 V supply. Pololu 3103
|Number of digital pins||26|
|Number of PWM channels||7|
|Ilość wejść analogowych||12|
|Logic voltage||5 V|
|Supply voltage min||2,7 V|
|Supply voltages max||15 V|
The A-Star 32U4 Mini LV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-up/step-down regulator that allows it to be powered efficiently from a 2.7 V to 11.8 V supply. This compact 1.9″ × 0.7″ board breaks out all 26 of the microcontroller’s I/O pins (of which 7 can be used as PWM outputs and 12 as analog inputs), and loading programs is made easier by a Micro-USB interface and a preloaded Arduino-compatible bootloader.
The Pololu A-Star 32U4 Mini boards are general-purpose programmable modules based on Atmel’s ATmega32U4 AVR microcontroller, which has 32 KB of flash program memory, 2.5 KB of RAM, and built-in USB functionality. The A-Star (abbreviated A*) adds a number of onboard features to support the microcontroller and make it easier to work with, including a 16 MHz crystal, a USB Micro-B connector, an in-system programming (ISP) header, a reset button, and three indicator LEDs.
Each A-Star 32U4 Mini contains a switching regulator that efficiently produces 5 V from an external voltage source to power the microcontroller. Three different versions are available, covering a wide range of input voltages:
A robust power selection circuit enables seamless transitions between regulator power and USB power, and overcurrent and reverse-voltage protection help safeguard the board against accidental damage.
All 26 general-purpose I/O lines on the ATmega32U4 are accessible on the A* 32U4 Mini; 7 of these are usable as PWM outputs and 12 are usable as analog inputs. The board measures 1.9″ × 0.7″, the same size as an Arduino Micro, and features a pair of mounting holes sized for #2 or M2 screws (not included). Its 0.1″ pin spacing makes the A* easy to use with solderless breadboards, perfboards, and 0.1″-pitch connectors.
This product requires a USB A to Micro-B cable (not included) to connect to a computer.