KAmodCSIextender - CSI extension through HDMI cable for Raspberry Pi cameras
ID: 583788
5906623433346
€10.82
Tax included
€8.80 tax excl.
KAmodCSIextender modules are designed to work with Raspberry Pi cameras. KAmodCSIextender allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters).
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
KAmodCSIextender modules are designed for cooperation with Raspberry Pi cameras, especially for Raspberry Camera V2. These cameras use a 15-pin FPC flat cable (which may have a limited length and are susceptible to mechanical damage). KAmodCSIextender allows you to extend the signal from the cameras using the HDMI <-> HDMI cable (up to 10 meters, depending on the quality of the HDMI cable). The HDMI cable is more durable and less susceptible to damage than thin FPC tape. In addition to the camera signal, 3 other signals, eg. GPIO may also be extended. The module is designed for use with Raspberry Pi 4 model B, Raspberry Pi 3 model B + , Raspberry Pi 3 model B , Raspberry Pi 2 model B and Raspberry Pi 1 model B + and Jetson Nano.
Attention!
The set does not have an HDMI cable, you should buy it separately, eg. HDMI cable (M) - HDMI (M) 3m , the set also does not include a camera for Raspberry Pi, eg Raspberry Pi HD Camera V2 8MP - RPI Camera Camera Board V2
properties
- Works with Raspberry Pi 4 model B, Raspberry Pi 3 model B +, Raspberry Pi 3 model B, Raspberry Pi 2 model B and Raspberry Pi 1 model B + and Jetson Nano
- Works with Raspberry Pi cameras, especially with Raspberry Pi Camera V2 (8MP, IMX219)
- Allows you to use an HDMI cable with a maximum length of 10 meters (depending on the quality of the HDMI cable)
- It also allows you to extend 3 other signals
- Dimensions: 24,1 x 25,2 mm - allows to mount to all Raspberry cameras that dimensions are 25x24mm
Included
- 2 x KAmodCSIextender
- 1 x FPC tape 15 pins (100 mm)
- 1 x Mounting kit (8x M2 screws, 4x spacers)
583788
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
5-megapixel HD camera module with OV5647 sensor designed for Raspberry Pi computers. The camera is equipped with a fisheye lens, the focal length is adjustable. Waveshare RPi Camera (G)
€20.49 24hAvailable quantity: 6 AvailableRaspberry Pi Camera Module, Fixed-focus, 5 megapixel OV5647 sensor in a fixed-focus module. Waveshare RPi Camera (D)
€15.30 24hAvailable quantity: 2 AvailableThe official “night vision” camera board released by the Raspberry Pi Foundation. High quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It\'s capable of 3280 x 2464 pixel static images, and also support 1080p30, 720p60, and 640x480p60/90 video.
€19.26 Delivery date unknown No product available!
High quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It\'s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60, and 640x480p90 video
€19.26 24hAvailable quantity: 151 AvailableFlex Cable for Raspberry Pi Camera - 100mm / 4"
€0.46 24hAvailable quantity: 649 Available5MP Mini Camera OV5647 Sensor 1080p 720p video for Raspberry Pi official Board. ArduCAM B0033
€9.62 24hAvailable quantity: 3 AvailableRaspberry Pi Camera Module, Fisheye Lens, Wider Field of View. Waveshare RPi Camera (J)
€30.61 24hAvailable quantity: 7 Available5 MPx camera module for Raspberry Pi OV5647 with CSI interface
Delivery date unknown No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
€41.67 Delivery date unknown No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
€52.54 24hAvailable quantity: 93 AvailableThe long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
€66.76 24hAvailable quantity: 29 AvailableIMX219 Visible Light Fixed Focus Camera Module for Nvidia Jetson Nano and Raspberry Pi Compute Module. Arducam B0191
€34.20 24hAvailable quantity: 9 Available5MP camera for Raspberry Pi minicomputers (1080p resolution). OV5647 sensor
€13.86 Delivery date unknown No product available!
5MP camera for Raspberry Pi minicomputers (1080p resolution). Equipped with OmniVision OV5647 sensor.
€5.17 Delivery date unknown No product available!
Other products in the same category (16)
Case designed for ArduCAM cameras for Raspberry Pi. It is compatible with camera modules with dimensions of 25x24 mm. ArduCAM U6270
€2.61 24hAvailable quantity: 1 AvailableLocking ring for M12 mount lenses. Arducam U6136
€0.38 24hAvailable quantity: 20 AvailableFlex Cable for Raspberry Pi Camera - 100mm / 4"
€0.46 24hAvailable quantity: 649 AvailableA tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1129
€2.52 24hAvailable quantity: 259 AvailableArduCam CSI to HDMI modules are designed to work with cameras: Raspberry Pi V1 and Raspberry Camera V2. ArduCAM CSI to HDMI allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters). Arducam B0091
€16.59 24hAvailable quantity: 5 AvailableThe set of three black flexible Arducam ribbons for Raspberry Pi cameras includes cables with lengths of 5 cm, 60 cm, and 100 cm, featuring 15-pin connectors with a 1.0 mm pitch on both ends. They are compatible with all Raspberry Pi A and B series models, camera modules, and displays. Perfect for projects such as 3D printers, home security systems, or other Raspberry Pi camera applications, offering a discreet appearance.
€9.64 24hAvailable quantity: 5 AvailableA tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1130
€4.06 24hAvailable quantity: 262 AvailableThe Arducam Mini Multi-Camera Adapter Board is an expander that can connect up to 4 ArduCam cameras. ArduCam B0074
€22.23 4 weeks No product available!
The control platform equipped with servos allows you to control the position of the camera in two dimensions. It has a built-in driver and light sensor. Waveshare Pan-Tilt HAT
€18.16 24hAvailable quantity: 4 AvailableFlexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
€0.64 6 weeks No product available!
Flex Cable for Raspberry Pi Camera - 300mm / 12"
€1.04 24hAvailable quantity: 128 Available300mm ArduCam extension cable. Compatible e.g. with IMX219 image sensor. ArduCam B0186
€23.01 4 weeks No product available!
Case designed for ArduCAM cameras for Raspberry Pi. It is compatible with camera modules with dimensions of 25x24 mm. ArduCAM U6251
€3.18 24hAvailable quantity: 2 AvailableThe ArduCam CB023 is a 150-millimeter cable with 22-pin connectors featuring a 0.5 mm pitch on both ends, designed for connecting camera modules to compatible devices such as the Raspberry Pi. Its length and specifications allow for flexible component placement in various projects, ensuring a stable and reliable connection.
€1.05 24hAvailable quantity: 5 AvailableThe 15 cm long tape allows you to connect the camera to the Raspberry Pi Zero series. Waveshare RPi Zero V1.3 Camera Cable 15cm
€2.50 4 weeks No product available!
The Arducam CS to M12 adapter allows you to use M12 or CS lenses with the Raspberry Pi HQ camera module, providing a wide range of optical options. ArduCam UB0225
€4.96 4 weeks No product available!
KAmodCSIextender modules are designed to work with Raspberry Pi cameras. KAmodCSIextender allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters).