12.3MP IMX477 Camera with C/CS Mount for Raspberry Pi - ArduCam B0240E
ID: 1203005
5902186334960
zł330.06
Tax included
zł268.34 tax excl.
12.3MP camera module with a Sony IMX477 sensor, interchangeable C/CS lens mount, MIPI CSI-2 interface, and tripod adapter, intended for use with Raspberry Pi platforms. ArduCam B0240E
Description
ArduCam B0240E is a camera module with a resolution of 12.3 MP, based on the Sony IMX477 sensor with an optical format of 1/2.3 inch. The camera is used in Raspberry Pi-based vision systems where high image detail and the ability to select optics for a specific application are required. The module works natively with Raspberry Pi OS and uses built-in V4L2 drivers, without the need to install additional software.
The camera supports the MIPI CSI-2 interface and is equipped with a 22-pin FPC connector, providing high-speed data transmission. The C/CS lens mount allows the use of a wide range of interchangeable lenses, and the included tripod adapter enables mounting the camera on standard tripods with a 1/4"-20 thread. The module is used in monitoring, automation, robotics, and industrial and research projects.
Features
- Sensor
- Sensor: Sony IMX477
- Sensor type: CMOS, back-illuminated
- Sensor resolution: 12.3 Mpix
- Sensor resolution (pixels): 4056 x 3040
- Optical format: 1/2.3 inch
- Pixel size: 1.55 µm x 1.55 µm
- Active sensor area: 6.287 mm x 4.712 mm
- Sensor diagonal: 7.9 mm
- Video output
- Typical video modes:
- 2028 x 1080 @ 50 fps
- 2028 x 1520 @ 40 fps
- 1332 x 990 @ 120 fps
- Lens
- Lens mount: C/CS
- Supported flange focal distance: 12.5 mm
- IR filter: Integrated 650 nm IR filter, visible light only
- Interface
- Interface: MIPI CSI-2
- Connector: FPC 22-pin
- Power and mechanics
- Camera board dimensions: 38 x 38 mm
- Tripod adapter: 1/4"-20 thread
- Functionality and compatibility
- Supported platforms: Raspberry Pi 5, Raspberry Pi 4B, Raspberry Pi 3B+, Raspberry Pi 3, Raspberry Pi 2, CM3, CM4, CM5, Raspberry Pi Zero W, Raspberry Pi Zero 2 W
- Supported operating system: Raspberry Pi OS Bookworm, Raspberry Pi OS Bullseye
Kit includes
- 1x ArduCam 12.3MP IMX477 camera module with C/CS adapter and tripod adapter
- 1x FPC camera cable 15-pin to 22-pin, 150 mm
- 1x FPC camera cable 15-pin to 15-pin, 150 mm
1203005
Data sheet
- Resolution
- 12,3 MPx
- Interface
- MIPI CSI-2
- Sensor
- IMX477
- IR filter
- Yes
- Lens assembly
- C/CS mount
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Evaluation set designed for the use of Internet of Things based on ArduCAM-Mini-2MP and ArduCAM-ESP8266-Nano-V2 modules. ArduCAM-Mini-2MP is a module with a 2 megapixel camera with an OV2640 transducer and an ESP8266 chip. Mounting the M12 lens. ArduCAM B0085
zł234.47
24h
Available quantity: 1
Available
Pcam 5C: 5 MP Fixed Focus Color Camera Module with Omnivision OV5640 5 megapixel (MP) color image sensor which includes various internal processing functions, incl. automatic white balance, automatic black level calibration, and controls for adjusting saturation, hue, gamma and sharpness. Digilent 410-358
zł222.59
24h
Available quantity: 1
Available
8 Mpx camera module with IMX219 sensor. The camera is intended for use as a replacement on the RPI Camera Board V2. ArduCAM B0180
zł45.90
4 weeks
No product available!
8 Mpx camera module with IMX219 sensor with low distortion lens. The camera is intended for use as a replacement on the RPI Camera Board V2. ArduCAM B0184
zł69.63
24h
Available quantity: 2
Available
Module with minicamera based on IMX219 matrix with 8 MPx operation for Nvidia Jetson Nano, with 300 mm tape. ArduCAM B0185
zł139.96
24h
Available quantity: 2
Available
IMX219 Visible Light Fixed Focus Camera Module for Nvidia Jetson Nano and Raspberry Pi Compute Module. Arducam B0191
zł61.50
24h
Available quantity: 7
Available
0.31 Mpx camera module with OV7251 sensor compatible with all versions of Raspberry Pi. The maximum video resolution is 640×480 pixels. ArduCAM B0161
zł150.85
4 weeks
No product available!
Image recognition sensor with built-in deep learning engine. The small module is equipped with an Omnivision OV7725 camera and various image recognition algorithms. Communication with the module is via the I2C and UART interface, as well as WiFi. DFRobot SEN0314
zł397.24
24h
Available quantity: 1
Available
Camera module with Sony IMX291 image sensor with 2 MP resolution. Compatible with Raspberry Pi. Supports H.264, MJPG and YUY2 data format. Has a built-in IR filter. ArduCam B0200
zł230.54
4 weeks
No product available!
Module with two GC0328 cameras designed to work with Sipeed MAix kits. The set has been designed for AI and stereo vision applications. Seeed Studio 114991702
zł96.83
24h
Available quantity: 2
Available
Camera for Raspberry Pi minicomputers. Works with all versions of minicomputers with a CSI socket. The camera is equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Raspberry Pi HQ Camera
zł237.00
24h
Available quantity: 41
Available
Stereo camera module with USB interface. Equipped with an OV2710 CMOS sensor with a resolution of 2 MP working in the visible and infrared range. ArduCAM B0198
zł628.62
4 weeks
No product available!
5MP camera for Raspberry Pi minicomputers (1080p resolution). OV5647 sensor
zł40.22
24h
Available quantity: 12
Available
5MP camera for Raspberry Pi minicomputers (1080p resolution). Equipped with OmniVision OV5647 sensor.
zł22.23
24h
Available quantity: 64
Available
Set with HQ camera and 6 mm wide-angle lens. The set works with all versions of Raspberry Pi minicomputers with a CSI socket. ArduCAM B0240
zł306.96
24h
Available quantity: 1
Available
Set with HQ camera, HDMI adapter, 6 mm wide-angle lens and tripod. It works with all versions of Raspberry Pi with a CSI socket. ArduCAM B0241
zł736.49
4 weeks
No product available!
12.3MP camera module with a Sony IMX477 sensor, interchangeable C/CS lens mount, MIPI CSI-2 interface, and tripod adapter, intended for use with Raspberry Pi platforms. ArduCam B0240E