RM520N-GL 5G HAT - 5G RM520N-GL module kit for Raspberry Pi + case
ID: 1185265
zł1,371.45
Tax included
zł1,115.00 tax excl.
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It guarantees multi-band frequency support, making the device suitable for use in countries and regions such as China, Japan, South Korea, Europe and the Middle East. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. The RM520N-GL supports GPS, GLONASS, Beidou, Galileo and QZSS positioning and communication with cloud-based devices. It is operated using AT commands.
The base board is equipped with an M2 connector, allowing connection to various 4G or 5G communication modules with an M2 connector. The board also features a USB 3.1 port, audio jack, decoder and two SIM card slots. The kit is connected to the Raspberry Pi via a standard 40-pin connector.
| 1. 40-pin GPIO connector | 7. Audio connector |
| 2. Switch | 8. Antenna connector |
| 3. M.2 slot | 9. Reset |
| 4. SIM slot | 10. Power supply switch |
| 5. USB 3.1 | 11. LED indicator |
| 6. USB type C |
| 12. Fun | 15. USB 2.0 pads |
| 13. SIM2 socket | 16. Audio NAU8810X chip |
| 14. Configuration switch | 17. Fun header |
An enclosure, antennas and cooling fan are included. The enclosure has universal mounts that allow the unit to be mounted on a wall or DIN rail. Full documentation is available on the product wiki page.
Features
- Quectel 5G RM520N-GL modem
- 5G standard: 3GPP R16
- Frequency band:
- 5G NR NSA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79
- 5G NR SA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79
- LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12(B17), B13, B14, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71
- LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48
- LAA: B46
- UMTS WCDMA: B1, B2, B4, B5, B8, B19
- GNSS: GPS, GLONASS, BeiDou, Galileo
- Data rate:
- 5G SA Sub-6: download 2.4 Gb/s; upload 900 Mb/s
- 5G NSA Sub-6: download 3.4 Gb/s; upload 550 Mb/s
- LTE: download 1.6 Gbps; upload 200 Mbps
- UMTS: Download 42 Mbps; Upload 5.76 Mbps
- 2 x SIM card slot
- Antenna connector: 4x SMA
- ON/OFF switch
- Reset button, LED indicator
- Power supply 5 V, 3 A
- Module dimensions: 56.7 x 85 mm
Kit contains
- RM520N-GL
- Case
- M.2 TO 4G/5G HAT
- 4 x external antenna
- 4 x IPEX adapter
- GNSS antenna
- USB3.0 dual-plug cable
- USB3.0 adapter
- USB2.0 adapter
- 2x20-pin connector
- Screw package
- 4 x SMA protective caps
- 5V 3A USB type C power adapter
1185265
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł184.00
24h
Available quantity: 92
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
Regular pricezł239.00zł217.00
24h
Available quantity: 201
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł287.00
24h
Available quantity: 108
Available
Other products in the same category (16)
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
zł348.52
6 weeks
No product available!
3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT
zł99.36
24h
Available quantity: 10
Available
HAT GSM / GPRS extension module for Raspberry Pi computers in versions 2 and +. The module is based on the SIM800 quad band SIM800. The set includes an antenna
zł151.46
6 weeks
No product available!
Kit with the LTE Cat-6 EM06-E module designed to work with the Raspberry Pi minicomputer. It supports communication within the fast LTE-A network and GNSS positioning. Waveshare EM06-E LTE Cat-6 HAT
zł509.10
4 weeks
No product available!
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
zł76.95
24h
Available quantity: 3
Available
Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT
zł103.30
4 weeks
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. SB Components 22571
zł159.90
24h
Available quantity: 5
Available
Module with RS232 and RS485 interface dedicated to Raspberry Pi minicomputer. Communication takes place via the SPI interface. Waveshare RS485 RS232 HAT
zł86.25
24h
Available quantity: 9
Available
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
zł95.96
6 weeks
No product available!
3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX
zł123.90
24h
Available quantity: 4
Available
3-port HUB module with USB 2.0 interface and RJ45 connector. Designed for Raspberry Pi Zero. Housing included. Waveshare ETH-USB-HUB-BOX
zł62.13
24h
Available quantity: 15
Available
The module from SIM7080G is designed for NB-IoT and Cat-M communications. It also enables the use of GNSS systems for positioning. Waveshare SIM7080G Cat-M/NB-IoT HAT (EN)
zł124.25
6 weeks
No product available!
Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT
zł380.22
24h
Available quantity: 5
Available
HAT module designed for the Raspberry Pi minicomputer. It allows you to add an RS485 interface and a CAN bus to the project, allowing for wired communication of many devices over long distances. SB Components 21444
zł102.90
24h
Available quantity: 4
Available
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT
zł553.77
24h
Available quantity: 1
Available
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł116.47
24h
Available quantity: 2
Available
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)