KAmod RPI 485&CAN Hat Module with two RS485 interfaces and a CAN interface for Raspberry Pi
search
  • KAmod RPI 485&CAN Hat Module with two RS485 interfaces and a CAN interface for Raspberry Pi
  • KAmod RPI 485&CAN Hat Module with two RS485 interfaces and a CAN interface for Raspberry Pi
  • KAmod RPI 485&CAN Hat Module with two RS485 interfaces and a CAN interface for Raspberry Pi
  • KAmod RPI 485&CAN Hat Module with two RS485 interfaces and a CAN interface for Raspberry Pi
ID: 1196991
5902186302396
zł102.78
Tax included

zł83.56 tax excl.

The KAmod RPI 485&CAN Hat module extends the functionality of Raspberry Pi 5 boards (and others with a 3.3 V SPI interface) with two galvanically isolated RS485 interfaces and one CAN 2.0B interface. The RS485 interfaces are based on the SC16IS752 controller, and the CAN interface on the MCP2515 system. The isolated transceivers used (ADM2483 and TJA1052) increase resistance to interference. Communication takes place via two SPI interfaces, and additional power supply options (from RPi or external 8-32 V) and a stabilized 5 V output allow for flexibility in power supply. The module can be mounted on RPi 5, also with an Active Cooler radiator, and can work with other microcontrollers. The maximum transmission speeds are 500 kbps for RS485 and 1 Mbps for CAN

24h
Available
Available quantity: 4

Description

KAmod RPI 485&CAN Hat allows you to easily expand Raspberry Pi 5 computers with two RS485 interfaces and one CAN 2.0B interface. The interfaces contain extensive protection circuits and are galvanically isolated from the control circuits, which guarantees operational stability and resistance to interference and failures. The module has been designed to be compatible with Raspberry Pi series boards not only in version 5. It is controlled via 2 SPI interfaces, available on the 40-pin RPi connector, and in many other boards, e.g. Arduino, STM32, etc.

Features

  • 2 RS485 interfaces - controlled by the SC16IS752 controller (SPI→2xUART)
  • 1 CAN 2.0B interface - controlled by the MCP2515 controller (SPI→CAN)
  • RS485 interfaces equipped with 2 isolated ADM2483 transceivers
  • CAN interface equipped with an isolated TJA1052 transceiver
  • RS485 and CAN interfaces galvanically isolated from control circuits
  • Possibility to connect 120 Ω terminating resistors to the line of each interface
  • Maximum communication speed of RS485 interests: 500 kbps
  • Maximum CAN communication speed: 1 Mbps
  • Control via two SPI interfaces operating at 3.3 V
  • Automatic control of the transmission direction of RS485 transceivers
  • 5 V/0.3 A power supply taken from the Raspberry Pi board or from an additional source
  • Optional power input adapted to the voltage in the range of 8...32 V
  • Stabilized 5 V power output, max 0.5 A
  • Easy installation on Raspberry Pi 5, also in the version with the RPi Active Cooler radiator
  • Can work with many boards from the Raspberry Pi family and others equipped with SPI interfaces operating at 3.3 V
  • Module dimensions 65x56 mm, height approx. 15 mm (and a connector under the board with a height of approx. 13 mm)

Included

  • Assembled and started module
  • A set of screws and spacers enabling screwing the overlay to the Raspberry board
1196991

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Other products in the same category (16)