PCIe HAT+ with 4G EG25-G modem for Raspberry Pi 5 - Waveshare 28557

Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B) (with case)

The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (EU)

The 2-CH CAN HAT+ expansion board adds two isolated CAN channels to the Raspberry Pi, with support for further expansion. Featuring the HAT+ standard, galvanic isolation, and surge protection, it is well-suited for industrial, automotive, and automation applications where reliable and safe serial communication is essential.

RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT

Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT

The PCIe TO M.2 HAT+ Acce A kit with a 128 GB SSD is a ready-to-use solution that expands the Raspberry Pi 5 with fast NVMe storage, providing enhanced performance and the ability to boot from the drive. With its compact design, power monitoring support, and compatibility with 2230/2242 form factors, the kit is ideal for building home servers, NAS systems, workstations, and projects requiring high data throughput.

Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT

The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)

HAT module for Raspberry Pi that supports global 4G LTE Cat-1 bands. It has a standard 40-pin GPIO connector, supports multiple communication protocols, including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL. It also offers GNSS positioning functions such as GPS, GLONASS, Galileo, and BeiDou. Waveshare SIM7670G LTE Cat-1/GNSS HAT

HAT module designed for Raspberry Pi minicomputer. Powala adds two CAN interfaces to the project. Waveshare 2-CH CAN HAT

Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT

Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT

Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT

PoE M.2 HAT+ (B) is a practical add-on board for Raspberry Pi 5 that enables simultaneous power over Ethernet and installation of a high-performance NVMe SSD. With boot support from the SSD and additional power output terminals, this module is ideal for projects requiring fast storage and reliable power supply, such as servers, surveillance systems, or IoT gateways.

Highly cost-effective multimedia hat compatible with the Raspberry Pi Model B+/2B/3B. Decodes and separates voices from HDMI signal, completely solving the poor quality problem with Raspberry Pi integrated sound card. DFR0450

PCIE TO 4-CH NVME Board (B) (EU) provides significant functionality expansion for the Raspberry Pi 5, enabling the use of high-speed NVMe SSDs. The version with an included power supply offers a ready-to-use solution for applications requiring high data throughput and reliable storage, such as NAS systems, surveillance, or miniature servers.