2.9" Tri-Color E-Ink Display 296x128 - Waveshare 13276
ID: 569474
zł58.82
Tax included
zł47.82 tax excl.
E-Ink display (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 2.9inch e-Paper (B)
Description
Display made in E-Ink technology (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128. The module has a built-in controller that communicates via the SPI interface.It enables viewing the image in three colors: red, black and white. The display's power supply is only necessary to change the screen content, refresh, ideally suited to applications that require a long battery life.The display is additionally characterized by large viewing angles above 170 °, which makes it ideal for for industrial applications in control and measurement devices with slow changes in the value of the measured quantity.
Features
- The display does not have a backlight so that the image stays on for a long time after turning off the power
- Very low power consumption, energy is only needed to refresh the screen content
- Extensive development support, user manual, programming resources in the form of a driver board diagram, examples on Raspberry Pi, Arduino and STM32
properties
- Diagonal: 2.9 inches
- Resolution: 296 x 128 pixels
- Communication interface: SPI (3 and 4 wire)
- Spot size: 0.138 mm x 0.138 mm
- Display colors: red, black, white
- Gray scale: 2
- Refresh time of the entire screen: 15 seconds
- The power needed to refresh the screen: 30 mW (typical)
- Power in standby mode: <0.017 mW
- Viewing angles:> 170 °
- Operating voltage: 3.3 V
- The size of the displayed image: 66.89 x 29.05 mm
- External dimensions: 36.7 x 79.0 x 1.05 mm
569474
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,9
- Resolution
- 296 x 128 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
E-Ink display (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 2.9inch e-Paper (B)
zł58.82
Delivery date unknown
No product available!
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller. Waveshare 1.54inch e-Paper (B)
zł38.43
Delivery date unknown
No product available!
E-Ink display module (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 12956
zł66.16
Delivery date unknown
No product available!
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller
zł54.45
24h
Available quantity: 1
Available
Driver for EPAPIER displays in the form of a HAT overlay for Raspberry Pi computers. The SPI interface is used for communication with the controller. Waveshare e-Paper Driver HAT
zł36.37
24h
Available quantity: 6
Available
Other products in the same category (16)
E-ink display for Raspberry Pi with 2.13 "diagonal resolution and 250x122 pixels with SPI controller. DFRobot DFR0591
zł114.33
24h
Available quantity: 1
Available
Waveshare 30411 is a large, energy-efficient 10.85-inch e-paper display that provides four-color display without the need for continuous power. Designed for shelf labeling, equipment tags, and information panels, it offers a wide viewing angle and low power consumption.
zł459.44
4 weeks
No product available!
The ePaper display module has a diagonal of 2.13" and a resolution of 250x122 pixels. It uses the SSD1680 controller and communicates via an SPI interface. Adafruit 4947
zł121.44
24h
Available quantity: 4
Available
Black and white e-Paper display with a diagonal of 3.7" and a resolution of 480x280 px. SPI interface. Without PCB. Waveshare 3.7inch e-Paper
zł108.08
4 weeks
No product available!
Module with e-Paper display, 3.52" diagonal and 360x240 px resolution. Communication via SPI interface. Waveshare 3.52inch e-Paper HAT
zł87.05
4 weeks
No product available!
Black and white e-Paper display module with 2.66" diagonal and 296×152 resolution. SPI interface. Waveshare 2.66inch e-Paper Module
zł56.76
24h
Available quantity: 3
Available
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 12.48" and a resolution of 1304x984 px. SPI interface. Waveshare 12.48inch e-Paper Module (B)
zł987.55
24h
Available quantity: 1
Available
Set with a 7.5" e-Paper display with passive power via NFC, NFC module and microSD card. Waveshare 7.5inch NFC e-Paper Eval Kit
zł516.81
4 weeks
No product available!
Module with e-Paper display, 7.8" diagonal and 1872x1404 px resolution. Communication via USB, SPI or I80 interface. Waveshare 7.8inch e-Paper HAT
zł726.38
24h
Available quantity: 1
Available
Module with a 3-color ePaper display with a resolution of 212x104 px, designed for FireBeetle tiles. It communicates via the SPI interface. DFRobot DFR0531
zł132.59
24h
Available quantity: 1
Available
Waveshare 2.15" (B) e-paper display in the version without a controller module enables energy-efficient and readable content presentation in three colors. With SPI interface and compatibility with platforms such as Raspberry Pi, Arduino, STM32, or Jetson Nano, it is a flexible solution for visual labeling and automation projects.
zł24.71
4 weeks
No product available!
This display uses NFC power and data transfer technology. It allows for wireless refreshment via smartphone or NFC reader and displays four colors: red, yellow, black, and white. E-paper keeps the image visible even without power, while the metal frame and mounting hole ensure durability and ease of use. Waveshare 1.54-inch NFC-Powered e-Paper (G)
zł115.04
6 weeks
No product available!
The 7.3", 7-colour ACeP e-Paper display has a resolution of 800x480 px. It has the ability to display images from a microSD card. Framed with a nice wooden border, it can be used as an electronic photo frame. Waveshare PhotoPainter (no BAT)
zł401.26
4 weeks
No product available!
7.5inch e-Paper (H) is a four-color e-paper display with a resolution of 800×480, designed for low-power outdoor and indoor applications. Controlled via SPI interface, it provides excellent readability under all lighting conditions and requires no power to maintain the displayed image.
zł218.47
24h
Available quantity: 3
Available
3-color e-Paper display with a diagonal of 5.83" and a resolution of 600x448 px. SPI interface. Without PCB. Waveshare 5.83inch e-Paper (C)
zł268.52
4 weeks
No product available!
Waveshare 7.3" (E) is a full-color e-paper display designed for integration with custom systems via the SPI interface. Thanks to E Ink Spectra 6 technology, the display is suitable for use in shelf labels, asset tags, information boards, and other projects where low power consumption, good readability, and print-like image aesthetics are essential. It works with popular hardware platforms such as Raspberry Pi, Arduino, Jetson Nano, and STM32 via an optional HAT module.
zł322.75
4 weeks
No product available!
E-Ink display (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 2.9inch e-Paper (B)