![STM32C0316-DK Discovery kit](https://kamami.pl/79447-large_default/stm32c0316-dk-discovery-kit.jpg)
![STM32C0316-DK Discovery kit](https://kamami.pl/79447-large_default/stm32c0316-dk-discovery-kit.jpg)
zł78.62 tax excl.
The STM32C0316-DK Discovery provides alternative features to the dedicated NUCLEO-C031C6 board. All 20 pins common to all STM32C0 series microcontrollers are available to the user
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
All 20 pins common to all STM32C0 series microcontrollers are available to the user. The user can replace the SWD debug pins by disconnecting the debug probe. The 5-way analog rocker switch and LED can be replaced with a slide switch that can be taken over by the user. All pins are accessible via DIP28 connector. Headers are not provided so that the user can choose the type of header. The built-in 1-pin 32768 Hz RTC clock generator can be cut off with a slide switch.
The kit helps in the migration from 8-bit microcontrollers to the STM32C0 series and between the STM32C0 and STM32G0 series microcontrollers. The DIP28 pinout has been designed to be as compatible as possible with the ATMEGA328 8-bit microcontroller. The LQFP48 base is compatible with microcontrollers from the STM32G031/071/0B1 series. The UFQFPN20 base is compatible with STM32C01 series microcontrollers. The WLCSP20 base is compatible with STM32G051 series microcontrollers.
The STM32C031C6 series microcontroller can be tested over the entire operating range. The 5.0 to 3.3 V voltage regulator trips when its source drops below 3.3 V. The debug probe level shifters adjust the debug signal levels to the microcontroller's target supply voltage.
This breakout board, based on the best-of-class Si4713, is an all-in-one stereo audio FM transmitter that can also transmit RDS/RBDS data. Adafruit 1958
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V
2-channel RS485 to Ethernet converter designed for industrial environment. It connects serial server, Modbus gateway, MQTT gateway, RS485 to JSON and network switch. It has two RS485 ports and two Ethernet ports. Waveshare 2-CH RS485 TO ETH (B)
Module dedicated to the audio preamplifier with DIP8 socket for NE5532, OPA2134, OPA2604 or AD826 chips
The module with a fingerprint sensor FPC1020A is designed for the M5Stack sets. The sensor has a built-in memory and can store up to 150 fingerprints. M5Stack U008
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
3D stereo camera module, which was built of two cameras with Sony IMX219 sensor and IMU ICM20948 sensor. Designed to work with Jetson Nano and Xavier NX. Seeed Studio 114992270
No product available!
Data logger pre-programmed to automatically log data from Qwiic sensors. It is designed for users who need to collect a lot of data into a CSV or JSON file. Data can be saved to a microSD card or sent wirelessly to an Internet of Things (IoT) service. SparkFun DEV-22462
No product available!
Module with a button and white LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-W
No product available!
The Step-Up converter module converts the voltage in the range of 10-60V to 12-90V with an efficiency of 97% and operates in the temperature range of -20°C to 65°C. The maximum current is 40A at the input and 22A at the output, with a weight of 400g.
Data logger with LPC2148 chip and microSD card support. The module is equipped with a microUSB connector, Li-Pol battery charger and a microSD card slot. SparkFun WIG-12772
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 12 V and a maximum input of up to 2 A. Pololu 4945
No product available!
Module with encoder and RGB backlight. It has an unlimited range of motion and is perfect for e.g. lighting control. Pimoroni PIM522
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
Module with 8 inputs for data acquisition from 0-24 mA analog current inputs. It communicates via RS485 interface and supports Modbus RTU protocol. The board is enclosed in an industrial enclosure. GM1008
The STM32C0316-DK Discovery provides alternative features to the dedicated NUCLEO-C031C6 board. All 20 pins common to all STM32C0 series microcontrollers are available to the user