ST25R3911B NFC development kit - Waveshare 17623
ID: 1178596
5902186300002
zł125.39
Tax included
zł101.94 tax excl.
The NFC module kit based on the ST25R3911B chip and the STM32F103RBT6 microcontroller enables wireless transfer of graphics from a microSD card to Waveshare e-Paper displays with NFC. Equipped with a 1.3" OLED display, a CP2102 USB-UART converter, 1 Mbit SRAM memory and user interfaces, it supports rapid prototyping of NFC applications and wireless communication systems. Waveshare 17623
Features
Kit with NFC module based on ST25R3911B chip and STM32F103RBT6 microcontroller. It has a built-in microSD card slot, on which the user can store graphics and then transfer them to the display via wireless technology. It also features an OLED display, function buttons and a microUSB slot, as well as a USB-UART converter.
| 1. STM32F103RBT6 | 8. 2 x LED indicator |
| 2. NFC chip ST25R3911B | 9. MCU pins |
| 3. SRAM 23LC1024, 1 MBit | 10. microUSB |
| 4. USB-UART converter CR2102 | 11. microSD |
| 5. 3,3 V voltage regulator SPX3819 | 12. SWD interface |
| 6. OLED 1,3" display | 13. NFC coil |
| 7. 4 buttons | 14. UART |
The displayed image can be also sent using a mobile device with the NFC function (the manufacturer provides the module with an application enabling data transfer to the display in a simple and convenient way). Full documentation with examples of use is available on the product Wiki page.
Features
- STM32F103RBT6 microcontroller, 72 MHz, 128 KB Flash, 20 KB SRAM
- NFC ST25R3911B chip
- SRAM 23LC1024 memory, 1 Mbit
- USB-UART converter CP2102
- Voltage stabilizer 3.3 V
- OLED display 1.3 ", 128x64 px, SH1106
- 4 x user button
- 2 x LED
- MicroSD card slot
- Reader dimensions: 66 x 105.5 x 17.6 mm
1178596
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
ATECC608A cryptographic chip module. Enables adding strong security to an IoT node, edge device or embedded system. Adafruit 4314
zł24.97
4 weeks
No product available!
1.0A Constant Current Buck Regulator for Driving High Power LEDs, Texas Instruments, SOIC8, RoHS
zł28.12
24h
Available quantity: 10
Available
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm
zł8.73
24h
Available quantity: 8
Available
Crowtail – HTU21D Humidity & Temperature Sensor 2.0 enables accurate temperature and humidity measurement using the digital I2C interface. It is suitable for environmental monitoring projects, automation systems, and weather stations.
zł18.19
24h
Available quantity: 5
Available
Module with 3 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4403
zł29.11
24h
Available quantity: 1
Available
The Microchip KSZ8081RNBIA-TR is an integrated Ethernet transceiver supporting 10Base-T and 100Base-TX standards, ideal for applications requiring fast and reliable network communications. With a compact QFN-32 package and auto-negotiation and auto-MDI/MDIX features, the transceiver easily integrates into space-constrained devices, increasing network design flexibility.
zł7.45
24h
Available quantity: 3726
Available
The GR10-30 sensor module, which can recognise up to 12 user gestures from a distance of up to 30 cm. It supports communication via both UART and I2C interfaces. DFRobot SEN0543
zł92.99
24h
Available quantity: 4
Available
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM491
zł86.38
24h
Available quantity: 3
Available
Available
HPI0624-2R2, SMD high power inductor, 2,2uH, Ioperation: 5.7A, 24mOhm, ± 20% Isat: 6.5A, ROHS
zł2.89
24h
Available quantity: 8
Available
FDT434P is a compact, high-performance P-Channel MOSFET designed for low-loss switching and power management in surface-mount applications
zł3.51
24h
Available quantity: 913
Available
CC-330 ceramic capacitors with a capacitance of 0.33 nF are a reliable component for implementing filtering, decoupling, and creating resonant circuits in electronic applications. The standard 2.54 mm pitch and THT mounting allow easy integration on prototype boards and in projects based on traditional through-hole technology. A set of 10 pieces is ideal for both single-unit production and service or hobbyist work.
zł3.75
4 weeks
No product available!
Compact expansion module compatible with DRV8825 and A4988 stepper motor drivers. It allows you to connect the module with the controller and convenient connection of other system components
zł5.20
24h
Available quantity: 3
Available
S380 is a miniature bridge rectifier in an SMD package, offering up to 0.8 A current at voltages up to 380 V. It is used in compact power supplies and electronic modules with limited installation space.
zł0.82
24h
Available quantity: 700
Available
Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15435
zł249.49
24h
Available quantity: 1
Available
Installation connector, 5-wire, 450 V, 32 A, with levers. Wago 221-415
zł3.39
1 weeks
No product available!
The NFC module kit based on the ST25R3911B chip and the STM32F103RBT6 microcontroller enables wireless transfer of graphics from a microSD card to Waveshare e-Paper displays with NFC. Equipped with a 1.3" OLED display, a CP2102 USB-UART converter, 1 Mbit SRAM memory and user interfaces, it supports rapid prototyping of NFC applications and wireless communication systems. Waveshare 17623