ESP32-D0WDQ6 - IoT ESP32 integrated circuit with Wi-Fi and Bluetooth BLE from Espressif
ID: 563391
5906623455874
zł16.90
Tax included
zł13.74 tax excl.
Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip
Description
Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2 V - 3.6 V. The system has a housing QFN48 (6x6mm).
properties
- Built-in Xtensa LX6 processor with two cores up to 240 MHz
- 448 kB ROM
- 520 kB of SRAM memory
- Supply voltage: 2.2 V - 3.6 V
- It allows you to operate digital buses, including: I2C, SPI, I2S, PWM, UART, IR, and CAN
- Built-in 12-bit SAR analogue digital converter (up to 18 channels)
- Built-in two digital-to-analogue converters with 8-bit resolution
- BT protocols: Bluetooth v4.2 BR / EDR and Bluetooth BLE
- Bluetooth Audio support: CVSD and SBC
- Wi-Fi protocols: 802.11 b / g / n / d / e / i / k / r (802.11no bit rates up to 150 Mbit / s)
- Wi-Fi work modes: sta / softAP / SoftAP + sta / P2P
- Wi-Fi security: WPA / WPA2 / WPA2-Enterprise / WPS
- Wi-Fi encryption: AES / RSA / ECC / SHA
- Network protocols: IPv4, IPv6, SSL, TCP / UDP / HTTP / FTP / MQTT
- Working temperature: -40 ° C - + 125 ° C
- QFN48 housing with dimensions of 6 x 6 mm
Block diagram of the system
563391
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Comprehensive development platform for Espressif ESP32 a WiFi-compatible microcontroller and nearly 30 I/O pins. DEV-13907
zł118.39
24h
Available quantity: 3
Available
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
zł55.12
Delivery date unknown
No product available!
Other products in the same category (16)
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
zł133.89
4 weeks
No product available!
Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4
zł59.90
24h
Available quantity: 4
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł230.77
4 weeks
No product available!
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
zł407.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
zł269.80
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071
zł415.00
24h
Available quantity: 1
Available
Board with WiFi and BLE Espressif ESP32-S3 module and OV3660 camera and digital microphone. It offers 8 MB Flash memory and 8 MB SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
zł64.89
24h
Available quantity: 34
Available
An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.
zł339.01
24h
Available quantity: 1
Available
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
zł74.24
24h
Available quantity: 2
Available
Development board equipped with ESP32-S3-WROOM-1 module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the ESP32 microcontroller. It can be programmed with Arduino, ESP-IDF, MicroPython and CircuitPython. SB Components 26647
Regular pricezł128.68zł105.31
24h
Available quantity: 2
Available
Waterproof controller with ESP32 module in an industrial-grade housing designed for demanding applications. It uses the Espressif ESP32 chip with the Xtensa® 32-bit LX6 core and a built-in Wi-Fi module. It is equipped with a 2-inch IPS display with a touch panel. M5stack K034
zł250.02
24h
Available quantity: 1
Available
A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b
zł355.80
24h
Available quantity: 1
Available
Development kit from the M5Stack series equipped with the ESP32-S3 module. It will work well in projects related to IoT or in "wearable" devices. M5 Stack C124
zł48.89
24h
Available quantity: 2
Available
Development board based on the ESP32-C3-MINI-1 module. It offers the ability to connect via WiFi, Bluetooth version 5 and Bluetooth Mesh. It is equipped with sensors, such as the SHTC3 temperature and humidity sensor or the IMU 6 DoF ICM-42670-P sensor. Espressif Systems ESP32-C3-DevKit-RUST-1
zł123.06
24h
Available quantity: 1
Available
Development board with Espressif ESP32-S3-WROOM-1 module. The module has built-in 8 MB Flash memory and 8 MB PSRAM and offers WiFi and Bluetooth LE wireless communication. Espressif Systems ESP32-S3-DevKitC-1-N8R8
zł89.91
24h
Available quantity: 6
Available
ESP32-S3-DevKitC-1U-N8R8 board with Wi-Fi, BLE, 8 MB flash, and 8 MB PSRAM for IoT projects and AI applications. Espressif ESP32-S3-DevKitC-1U-N8R8
zł77.90
24h
Available quantity: 15
Available
Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip