![DPI TFT Kippah - DPI display driver for Raspberry Pi](https://kamami.pl/78780-large_default/dpi-tft-kippah-dpi-display-driver-for-raspberry-pi-adafruit-2453.jpg)
![DPI TFT Kippah - DPI display driver for Raspberry Pi](https://kamami.pl/78780-large_default/dpi-tft-kippah-dpi-display-driver-for-raspberry-pi-adafruit-2453.jpg)
zł95.63 tax excl.
TFT LCD driver with DPI interface dedicated to Raspberry Pi. It allows you to operate resistive touch panels. Adafruit 2453
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
TFT LCD driver with DPI interface dedicated to Raspberry Pi. It allows you to replace the standard solution with an HDMI signal decoder with a cheaper counterpart. The module is connected to the minicomputer via a 40-pin connector and uses pins from GPIO2 to GPIO21, so the user must take into account the lack of many communication interfaces, including UART, I2C or SPI. In addition, the driver replaces the HDMI output, so it is not possible to use both interfaces at the same time. The module works with with 5-inch and 7-inch displays with a resolution of 800x480 px with a 40-pin DPI interface, and the brightness of the display is configured using jumpers. The controller also allows you to operate resistive touch panels. It will work in projects where the user does not need all GPIOs and wants to easily add a high-quality display. Full documentation with configuration examples is available on the product page.
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Audio module with two microphones and display designed to work with the Raspberry Pi. Pimoroni PIM524
Module of the 8-channel I2C expander based on the TCA9548A system. It enables communication with many I2C devices that have the same address. Pimoroni 8086-006
No product available!
Module with E-Ink (e-Paper) display with a diagonal of 2.13" and a resolution of 250x122 px. Designed for minicomputers Raspberry Pi. Adafruit 4687
A set for building a mini console for arcade retro games designed to work with the Raspberry Pi. The console is connected to a TV or monitor with an HDMI input. For self-assembly. Pimoroni PIM488
8-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. With LCD 4,3" display. SB Components 21871
2-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 14088
No product available!
Overlay compatible with Raspberry Pi Zero, Zero W, Zero WH, 1A+, 3A+, 3B, 3B+, 4B. Includes LEDs, buttons, USB-UART converter (USB connector) and buzzer. Cytron Maker pHAT
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
HAT module with TB6612FNG motor driver and PCA9685 PWM driver designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector. Adafruit 4280
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5054
No product available!
HAT designed for Raspberry Pi minicomputers with a two-channel RS232 converter. Communication is realized via the SPI interface. The overlay uses a standard 40-pin Raspberry Pi connector. Waveshare 2-CH RS232 HAT
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM299
Audio module with DAC, stereo amplifier and display, designed to work with the Raspberry Pi. Pimoroni PIM484
Audio module based on a 32-bit PCM5102A DAC converter intended for cooperation, among others with Raspberry Pi minicomputers. Communication via the I2S interface. GY-PCM5102
No product available!
The set with the RM500U-CN module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks. Waveshare RM500U-CN 5G HAT
No product available!
Module with a color LCD TFT display with a diagonal of 1.3" and a resolution of 240x240 px. Designed for minicomputers Raspberry Pi. Adafruit 4506
TFT LCD driver with DPI interface dedicated to Raspberry Pi. It allows you to operate resistive touch panels. Adafruit 2453