Apollo Agilex SOM - module with SoC FPGA Intel Agilex

Programmable Logic IC Development Tools Cyclone V SE 5CSEMA4U23C6N + 800MHz Dual-core ARM Cortex-A9 processor. Terasic P0496

VEEK-MT2S is a development board based on the Cyclone V SX SoC Cyclone V SX SoC-5CSXFC6D6F31C6N chip. Included in addition to the board with programmable FPGA, there are also a 7-inch TFT touchscreen with a resolution of 800 x 480 pixels, 8 megapixel camera (3264 x 2448 pixels), light sensor IMU 9DOF sensor (accelerometer, gyroscope, magnetometer) . Terasic K0161

VEEK-MT2S is a development board based on the Cyclone V SX SoC Cyclone V SX SoC-5CSXFC6D6F31C6N chip. Included in addition to the board with programmable FPGA, there are also a 7-inch TFT touchscreen with a resolution of 800 x 480 pixels, 8 megapixel camera (3264 x 2448 pixels), light sensor IMU 9DOF sensor (accelerometer, gyroscope, magnetometer) . Terasic K0161

The adapter is designed to connect boards with a PCIe connector to a computer. Can support PCIe Gen3 x4 interface. Terasic P0492

The development board with the Aria 10 GX FPGA chip is ideal for projects requiring high memory capacity, fast data transmission and effective power management. Terasic P0489

The Terasic VEEK-MT2 set provides a complete hardware-software platform for designing embedded and multimedia systems using FPGA chips. It enables the creation and testing of interactive, control, and measurement applications thanks to an extensive base of interfaces, memory, and sensors.

The robot can recognize the attitude in real time using an acceleration and gyroscope sensor, as well as achieve balance by controlling the motors to adjust the position. Terasic P0582

Integrated single board computer with Cyclone V SoC core. SoC SoM includes DDR3 memory, Flash memory, energy management system, common interface controllers and disc software (BSP). Terasic P0581

Development kit with SoC FPGA Inter Arria 10. Dedicated to industrial embedded applications with high performance requirements. Terasic P0506

FPGA starter kit equipped with Cyclone V GT with 301K LE and supports PCIe Gen 2x4. The board has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0559

[EDUCATIONAL PRICE] FPGA starter kit equipped with Cyclone V GT with 301K LE and supports PCIe Gen 2x4. The board has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0559

TerasIC SODIMM memory module with 18MB capacity and 550MHz operating frequency. The module is designed to work with Intel Stratix 10 FPGAs in evaluation kits such as TerasIC DE10-Pro-GX-280-4G and TerasIC DE10-Pro-GX-280-8G. TerasIC S0534

SoM module with SoC connecting the FPGA with the ARM Cortex-A9 core. The board is equipped with DDR4 Eadge connector (with 3.3 V power supply). P0553

MAX 10 Plus is a development kit based on the FPGA chip from Intel, equipped with 50,000 programmable logic elements. p0638

The XTS-FMC module is an extension for FPGA devices that allows access to communication channels via the SMA connector. P0401

[EDUCATIONAL PRICE] FPGA starter kit equipped with Cyclone V GT with 301K LE and minicomputer with Intel Celeron Dual Core (64 GB eMMC, 4 GB RAM). The FPGA module has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0650