Terasic DE5a-Net-DDR4

Description

The Terasic DE5a-Net-DDR4 board with the Aria 10 GX FPGA chip is ideal for projects requiring high memory capacity, high speed data transfer and effective power management. The FPGA includes 4 integrated transceivers with a maximum data rate of 12.5 Gbps, which ensures full compatibility with the PCI Express 3.0 standard and connection with four external QSFP + 40G modules.

For applications requiring large memory capacity with short access time, the board provides two DDR4 RAM SO-DIMM slots. four QDRII + SDRAM memory banks and FLASH memory. The DE5a-Net-DDR4 kit allows the development of even the most demanding applications, such as low latency data transfer, cloud computing, high-speed computing, network processing and signal processing.

properties

• Intel Arria 10 GX (10AX115N2F45E1SG) FPGA chip
• Built-in USB Blaster II programmer
• Place for JTAG connector for programming the system
• Parallel FPP configurator programmed on the MAX II system
• FLASH memory with a capacity of 256 MB
• 2 independent DDR4 SODIMM sockets, 16 GB 1066 MHz or 8 GB 1200 MHz for each socket
• 4 independent QDRII + SDRAM chips, 18-bit bus, 72 MBit bandwidth
• 4 QSFP + slots
• PCI Express (PCIe) x8 edge connector (includes Windows PCIe drivers)
• RS422 extension connector
• 4 LEDs
• 2 digits of a 7-segment display
• 4 buttons
• 2 switches
• SMA connectors for clock input and output
• A 50 MHz oscillator
• Programmable clock signal generator
• Temperature sensor
• Power monitoring
• Fan controller
• Power from the PCI Express bus
• Additional 6-pin PCIe power connector
• Dimensions: 240 x 106.65 mm

Placement of elements

Included

1. DE5a-Net-DDR4 development board
2. USB cable - Mini USB
3. 2 SO-DIMM DDR4-2400 4G modules
4. A set of screws and spacers
5. Power supply with power cord
6. PCIe bracket (mounted)
7. Instructions for the module
8. Cooling fan (installed)
9. AC power cord