Altera MAX10 NEEK with 7" 5-point touch screen

Evaluation module with Intel Stratix 10 SoC processor with 2800K logic elements. The module has DDR4 SDRAM memory (up to 64 GB), built-in USB-Blaster II, Ethernet, microSD, miniUSB and expandable FMC/FMC+ connectors. TerasIC Apollo S10 SoM Board (P0630)

Set with FPGA Terasic DE10-Nano board and WiFi module. Designed for projects using FPGA to work in the cloud. TerasIC P0700

Terasic HDMI-FMC is a HDMI transmitter/receiver daughter board with FMC (FPGA Mezzanine card) interface

VEEK-MT2S is a development board based on the Cyclone V SX SoC Cyclone V SX SoC-5CSXFC6D6F31C6N chip. Included in addition to the board with programmable FPGA, there are also a 7-inch TFT touchscreen with a resolution of 800 x 480 pixels, 8 megapixel camera (3264 x 2448 pixels), light sensor IMU 9DOF sensor (accelerometer, gyroscope, magnetometer) . Terasic K0161

TerasIC XSFP/SFP+HSMC (P0092) enables the development of 10G Ethernet systems based on the XAUI interface, featuring two SFP+ channels and a 156.25 MHz reference clock. Designed for integration with FPGA boards equipped with an HSMC connector — including Stratix IV GX and DE4 — the module is used in networking projects, data transmission applications, and high-throughput interface testing.

Terasic Spider is a six-legged robot rolling with 18 servos controlled by the Altera DE0-Nano-SoC board connecting the FPGA chip and the ARM Cortex-A9 processor. The set contains a complex robot and numerous accessories. P0425

The TerasIC P0057 kit enables testing, debugging, and signal simulation in systems using the HSMC interface. It is intended for design and diagnostic work with FPGA main boards and other systems equipped with an HSMC connector.

The motor driver card can drive 24 servo motors at most. It can be used to drive a multiple-joint robot machine, such as Hexapod Robot, Biped Robot, and Arm Robot. P0288

DE1-SoC + 5 points multitouch display MTL2

Altera DE0 NANO Development and Education Board introduces a compact-sized FPGA development platform suited for prototyping circuit designs such as robots and "portable" projects. The board is designed to be used in the simplest possible implementation targeting the Cyclone IV device up to 22,320 LEs.

[EDUCATIONAL PRICE] Terasic DE0 Board evaluation kit for Altera Cyclone III FPGA devices. It is equipped with all basic peripherals enabling research and evaluation work with FPGAs, including a JTAG programmer-configurator. The reduced price (compared to the standard Terasic DE0 version) applies exclusively to schools, universities, lecturers, pupils, and students.

Development platform based on Intel MAX 10 FPGA. The system provides the user with 50,000 logical elements and 1638 kbits M9K and 5888 kbits Flash. The board contains components such as built-in USB-Blaster II, QSPI Flash, ADC connector, WS2812B RGB LED and 2x6 TMD connector. Academic version. TerasiC T-Core P0633

The A-Cute Car is an FPGA-based three-wheeled robotic car kit. This car can provide higher operation performance than the MCU based robotic car, because the FPGA provides more powerful computing power than the MCU. P0467

TerasIC NET is an HSMC-standard Ethernet module enabling rapid implementation of network communication in FPGA systems. With support for speeds from 10 Mb/s to 1 Gb/s and full integration with FPGA devices, it is a convenient tool for designing applications that require reliable network communication.

FPGA starter kit equipped with Cyclone V GT with 301K LE and supports PCIe Gen 2x4. The board has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0559

FPGA starter kit equipped with Cyclone V GT with 301K LE and minicomputer with Intel Celeron Dual Core (64 GB eMMC, 4 GB RAM). The FPGA module has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0650