 
        
           
        
          Terasic D8M-FMC is a 8-megapixel camera kit with a FMC low pin count connector interface. It includes a MIPI camera module, MIPI decoder, and HDMI-TX.
The MIPI camera module captures image and sends it out in a MIPI video signal package. This packet is converted in a 10-bit parallel Bayer pattern through a MIPI decoder. The data is transmitted through a FMC connector. The MIPI camera module has a built-in Voice Coil Motor (VCM) to control its focal length. Users can adjust it via I2C interface. The D8M-FMC also includes a HDMI-TX for deveopers to display the processed video image on a monitor with HDMI input when the FPGA main board has no display capabilities.
The FMC connector is the standard expansion interface defined in VITA 57.1. Any main boards with a FMC connector can interface with D8M-FMC.
Terasic D8M-FMC kit also includes camera capture and display reference designs. It comes in two versions. One is RTL code only and the other one uses components such as Altera VIP in Qsys. It enables users to rapidly be familiar with the operation of the camera module and develop custom applications based on these examples.
Block Diagram 
 

The functional block diagram of D8M-FMC is shown above. MIPI Camera Module sends the video captured to MIPI Decoder via MIPI link. MIPI Decoder converts MIPI Video Data to parallel data and output to the main board through a FMC connector. The parameters of the MIPI Camera Module and MIPI Decoder can be configured by FPGA via I2C interface. For instance, number of output pixels from MIPI Camera Modules, RGB gain, position of focus, PLL of MIPI Decoder, and parameters of Video MIPI Decoder etc.
The D8M-FMC also includes a HDMI-TX for deveopers to display the processed video image on a monitor with HDMI input when the FPGA main board has no display capabilities.
Activity
The D8M-FMC Package is designed for FPGA main boards with FMC expansion header.






1. D8M-FMC
 2. Screw & Copper Pillar Pakage
 3. CD Download Guide
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Gigabit Ethernet transceiver with an FMC interface. Up to 1 Gbps network transfers with the host board using an FMC connector. NET-FMC can be connected any FMC(HPC) interfaces. Terasic P0481
 No product available!
SoM module with SoC connecting the FPGA with the ARM Cortex-A9 core. The board is equipped with DDR4 Eadge connector (with 3.3 V power supply). P0553 
 No product available!
Cyclone V E FPGA Video Development System
 No product available!
Altera DE0 NANO Development and Education Board introduces a compact-sized FPGA development platform suited for prototyping circuit designs such as robots and "portable" projects. The board is designed to be used in the simplest possible implementation targeting the Cyclone IV device up to 22,320 LEs.
The TerasIC HDMI v1.4 (P0087) module enables the implementation of a complete HDMI transmit–receive chain in FPGA systems. With support for Full HD resolution, compliance with HDMI 1.4a, and included reference designs, it serves as a versatile solution for testing, learning, and deploying video transmission in embedded and multimedia applications.
 No product available!
Terasic DE10-Lite is a cost-effective Altera MAX 10 based FPGA board. Kit contains lots of reference designs and software utilities for users to easily develop their applications based on these design resources
TerasIC XTS-HSMC is an expansion card for FPGA platforms with transceivers, enabling signal conversion to SMA connectors and rapid prototyping of high-throughput interfaces. It is useful in compliance testing, transmission quality evaluation, and projects requiring reliable data transfer at gigabit speeds.
 No product available!
2x16 LCD Module (No Backlight)
The Terasic LT24 is a 2.4” LCD touch module with 240(H) x 320(V) display resolution. It can be bundled with various Terasic FPGA development boards through the 2x20 GPIO interface. P0185
Integrated single board computer with Cyclone V SoC core. SoC SoM includes DDR3 memory, Flash memory, energy management system, common interface controllers and disc software (BSP). Terasic P0581
 No product available!
Evaluation board with an Intel Agilex SoC featuring 1.4 million logic elements. The module includes sockets with built-in 32 GB DDR4 SO-DIMM memory, a QSFP28 connector, PCIe Gen 4x16, an integrated USB-Blaster II, and FMC/FMC+ connectors for expansion. TerasIC Apollo Agilex SOM (P0795)
 No product available!
Terasic HDMI-FMC is a HDMI transmitter/receiver daughter board with FMC (FPGA Mezzanine card) interface
The TerasIC HDMI_TX P0084 module enables HDMI transmission using the HSMC interface in FPGA projects. Compatibility with the latest HDMI standards and the provided source code accelerate the development and testing of vision and multimedia applications in FPGA-based systems.
 No product available!
 No product available!
The adapter is designed to connect boards with a PCIe connector to a computer. Can support PCIe Gen3 x4 interface. Terasic P0492
[EDUCATIONAL PRICE] FPGA starter kit equipped with Cyclone V GT with 301K LE and minicomputer with Intel Celeron Dual Core (64 GB eMMC, 4 GB RAM). The FPGA module has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0650
 No product available!
 
                    8 Mega Pixel Digital Camera Package with FMC interface