Main view
search
  • Main view
  • Top view
  • Bottom view
ID: 1188473
zł339.00
Tax included

zł275.61 tax excl.

Module with a CO2 sensor based on the XENSIV PAS CO2 system from Infineon. It enables precise measurement of CO2 concentration in ppm via I2C, UART and PWM interfaces. SparkFun SEN-2295

3 weeks
On request
Kamami is the official distributor of Sparkfun modules and development kits. All products of this brand in our offer are original and come directly from the manufacturer.

 

Free shipping

free shipping in Poland for all orders over 500 PLN

 

Same day shipping

If your payment will be credited to our account by 11:00

 

14 days for return

Each consumer can return the purchased goods within 14 days

Description

Module with a CO2 sensor based on the advanced XENSIV PAS CO2 system from Infineon. Enables precise measurement of CO2 concentration in direct parts per million (ppm) format via I2C, UART and PWM interfaces. PAS CO2 technology uses a photoacoustic spectroscopy system that combines narrowband infrared light with a high-sensitivity microphone inside the measurement chamber. This enables the measurement of CO2 concentrations ranging from 0 to 32,000 ppm with the best accuracy of ±(30ppm + 3%) when reading between 400 ppm and 5,000 ppm. Additionally, the built-in microcontroller converts the data into direct ppm reading via any of the three communication interfaces.

The infrared emitter in the PAS CO2 sensor requires a 12 V power supply. Therefore, the AP3012 amplification circuit with a set of buffer capacitors is placed on the board, providing 12 V power from 3.3 V via the Qwiic connection. As a result, the boards are slightly larger than standard Qwiic modules. The PAS CO2 interrupt pin has unique functions, enabling not only signaling of alarm thresholds, data readiness or sensor occupancy statuses, but also configuration as an early notification of the start of measurement during continuous reading.

Features

  • Photoacoustic spectroscopy measurement system
  • The integrated microcontroller outputs direct ppm measurements
  • Three operating modes: idle, continuous, single measurement
  • CO2 measurement range: 0 to 32,000 ppm
  • Maximum CO2 measurement accuracy: ±(30 ppm + 3% of reading)
  • Conditions for maximum accuracy: Reading between 400 ppm and 5000 ppm
  • Communication interfaces: I2C (default), UART, PWM
  • I2C address: 0x28
  • 2 x Qwiic connectors
  • Supply voltage ranges:
    • VDD3.3: 3.0 to 3.6V
    • VDD12: 10.8 to 13.2 V
  • Ambient temperature range during operation: 0 to 50°C
  • Relative operating humidity range: 0 to 85% RH
1188473

Data sheet

Interface
I2C/UART
Type of sensor
PASCO2V01
Power supply voltage
3,3 V
Concentration measurement
CO2

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

You might also like

Other products in the same category (16)

Shopping Cart
No Product in Cart