![Gravity: I2C Ozone Sensor - module with ozone sensor Gravity: I2C Ozone Sensor - module with ozone sensor](https://kamami.pl/38286-large_default/gravity-i2c-ozone-sensor-module-with-ozone-sensor-sen0321.jpg)
![Gravity: I2C Ozone Sensor - module with ozone sensor Gravity: I2C Ozone Sensor - module with ozone sensor](https://kamami.pl/38286-large_default/gravity-i2c-ozone-sensor-module-with-ozone-sensor-sen0321.jpg)
zł213.27 tax excl.
Module with an ozone detection sensor that performs measurements in the range of up to 10 ppm with a resolution of 0.01 ppm. The module is equipped with an I2C interface. DFRobot SEN0321
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with ozone detection sensor. It uses an electrochemical method to detect O3 in air, which ensures a stable and accurate measurement. The module is equipped with an I2C interface. It performs measurements up to 10 ppm with a resolution of 0.01 ppm. It is supplied with the voltage ranging from 3.3 V to 5.5 V. It can be used to build a portable detector, air quality monitoring devices or ozone disinfection devices.
Ozone is a gas that strongly stimulates the human body. It is produced mainly by the photochemical reaction of NOx and VOC emissions. Too much ozone in the air can cause coughing, shortness of breath and decreased lung function, as well as headaches, increased heart rate, memory loss and visual disturbances. The acceptable standard of ozone concentration that people can take in a day is 260 μg / m3.
When using the module, it should be remembered that it should not be immersed in an oxygen-free environment or flooded with resin. It should also not be used for a long time in an environment containing corrosive gas. The sensor should be protected against shock and vibration.
There is a user manual with sample programs on the product wiki page.
Attention!
The white waterproof and breathable membrane of the sensor on the module is strictly forbidden to open, otherwise it is regarded as artificial damage.Data sheet
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
No product available!
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
Module with ozone detection sensor. It performs measurements up to 10 ppm with a resolution of 0.01 ppm. It has a UART output and an analog output. ZE25-O3
Volatile gas sensor module, including LPG, natural gas, natural gas
Module with temperature, humidity and pressure sensor BME680 from Bosch. The module communicates via I2C or SPI interfaces.
Adapter for MQ gas sensor with potentiometer for analog signal calibration. MOD 72
Integrated gas sensor, pressure, humidity and temperature in the LGA-8 housing. Bosch Sensortec BME680
Module with an analog MQ7 carbon monoxide sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0132
Module with the MiCS-5524 analog gas sensor. It allows you to measure the concentration of CO, CH4, 2H5OH, C3H8, C4H10, H2, H2S and NH3. DFRobot SEN0440
A sensor that detects the concentration of nitrogen dioxide. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0471
No product available!
Module with hydrogen sulphide sensor made in MEMS technology. It allows gas detection in the range of 0.5 to 50 ppm and has an analog output. DFRobot SEN0568
Gravity: Formaldehyde (HCHO) Sensor is a module for measuring the concentration of formaldehyde (methane) in the air. It can be supplied with voltage in the range of 3.3 ... 6V. DFRobot SEN0231
Module with an analog MQ2 gas sensor. It enables the detection of LPG, butane, propane, methane, alcohol, hydrogen and smoke. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0127
Module with CO2, temperature and humidity sensor SCD-40. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5187
No product available!
The MQ-6 sensor allows the measurement of LPG, propane and isobutane. The measuring range of the sensor is in the range of 300 - 10.000 ppm, while the output receives an analog signal.
Module with four gas sensors that allow the detection of CO, NO2, alcohol and volatile organic compounds (VOC). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020820
Sensor that detects the concentration of chlorine. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0468
No product available!
Module with an ozone detection sensor that performs measurements in the range of up to 10 ppm with a resolution of 0.01 ppm. The module is equipped with an I2C interface. DFRobot SEN0321