- New
New products
New products
zł67.99
24h
Available
zł69.00
24h
Available
zł67.99
24h
Available
Available
zł79.00
24h
Available
zł67.99
24h
Available
zł69.00
24h
Available
zł67.99
24h
Available
Available
zł79.00
24h
Available
ACS37220LEZATR-100B3 Current Sensor - module with current sensor from -100A to 100A, 3.3V
ID: 1194422
5906623499212
zł21.40
Tax included
zł17.40 tax excl.
Precision Hall effect current sensor offering galvanic isolation, wide 150 kHz bandwidth and the ability to measure AC and DC current with very low power loss. With differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5290
Description
The ACS37220 Hall Effect Current Sensor is a current sensing module based on the Hall effect, offering electrical isolation and a wide bandwidth of 150 kHz. With its ultra-low conductive path resistance, it ensures minimal power loss and high measurement efficiency. The sensor can be placed anywhere in the circuit and used in applications requiring galvanic isolation. Thanks to differential Hall sensing, the device is resistant to external magnetic interference, ensuring high accuracy. The sensor outputs an analog voltage proportional to the current value, enabling measurement of both DC and AC current. The module operates with a supply voltage from 3.15 V to 3.45 V, and the output is ratiometric, meaning its center point is VCC/2 and changes by 13,2 mV per ampere of current flow. Its fast response time makes it ideal for high-speed measurement systems and real-time current monitoring.
For proper operation, the sensor requires five connections: current input (IP+ and IP−), logic power supply (VCC and GND), and sensor output (VOUT). The FAULT pin is internally pulled up to VDD and is pulled low when the current IP exceeds the configured overcurrent threshold in either direction. This output indicates the current fault status. The module uses a multilayer PCB for high durability and reliability. Large mounting holes allow connection via wires or screw terminals. Alternatively, 2.54 mm pitch holes are also available, although not recommended for high-current applications. Thanks to its high accuracy, flexible mounting options, and resistance to interference, the sensor is ideal for use in power systems, power converters, battery monitoring circuits, and motor control systems.
Features
- Sensor type: Allegro ACS37220
- Measurement range: up to 100 A
- Technology: Hall effect with galvanic isolation
- Bandwidth: 150 kHz
- Supply voltage: 3.15 V to 3.45 V
- Conduction path resistance: 0.1 mΩ
- Analog output proportional to current intensity
- Ratiometric output voltage centered at VCC/2
- Fast response time: below 4 µs
- Built-in digital temperature compensation
- Supports both DC and AC current
- Overcurrent fault indication output (FAULT pin)
- Connection options: screw terminals, 2.54 mm pins
- Pin pitch: 2.54 mm (breadboard compatible)
- Dimensions: 17.8 x 20.3 mm
- Weight: 1 g
1194422
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±100 A
- Sposób podłączenia
- Szeregowy
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5291
zł20.06 24hAvailable quantity: 7 AvailablePrecision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5293
zł20.06 24hAvailable quantity: 7 Available
Other products in the same category (16)
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5255
zł44.93 24hAvailable quantity: 2 AvailableThe current measurement with a value of 0 - 5A is realized by the ACS712-05 system based on the Hall effect. The system sensitivity is 185mV / A (analog signal).
zł8.66 6 weeks No product available!
Module with ACS724LLCTR-30AU current sensor with a measuring range of direct and alternating current from 0 to 30 A. It communicates via an analog interface. Pololu 4046
zł31.33 24hAvailable quantity: 3 AvailableThe ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5260
zł44.93 24hAvailable quantity: 2 AvailableA modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5235
zł47.31 24hAvailable quantity: 2 AvailablePrecision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5293
zł20.06 24hAvailable quantity: 7 AvailableACS724LLCTR-05AU current sensor module with a current measurement range from 0 to 5 A. It communicates via an analog interface. Pololu 4048
zł32.07 24hAvailable quantity: 2 AvailableThe ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5259
zł44.93 24hAvailable quantity: 2 AvailableModule with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
zł100.82 24hAvailable quantity: 1 AvailableVoltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 45 A. SparkFun SEN-16407
zł136.90 3 weeks No product available!
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
zł83.91 24hAvailable quantity: 2 AvailableACS714 Current Sensor Carrier -5 to +5A
zł115.02 24hAvailable quantity: 1 AvailableThe ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5245
zł17.85 24hAvailable quantity: 2 AvailableVoltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 90 A. SparkFun SEN-16408
zł136.90 3 weeks No product available!
Precision Hall effect current sensor, providing galvanic isolation and wide 250 kHz bandwidth. Low conductive path resistance, magnetic interference immunity and ratiometric analog output make it ideal for AC and DC current monitoring applications. Pololu 5281
zł55.78 24hAvailable quantity: 3 AvailableModule with ACS724LLCTR-05AB current sensor with a measuring range of direct and alternating current from -5 to 5 A. It communicates via an analog interface. Pololu 4041
zł47.71 24hAvailable quantity: 1 Available
Precision Hall effect current sensor offering galvanic isolation, wide 150 kHz bandwidth and the ability to measure AC and DC current with very low power loss. With differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5290