- Out-of-Stock
Grove PH Sensor Kit - analog pH meter
ID: 583078
Set with a measuring module and a probe for measuring the pH in aqueous solutions. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020291
Description
Set with a measuring module and a probe for measuring the pH in aqueous solutions. It enables measurement in the range from 0 to 14 pH (accuracy 0.15 pH) and a response time of approx. 1 minute. The electrode is connected to the measuring module via the BNC connector. It is made of a sensitive low impedance diaphragm. The module has a quick response and good thermal stability. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the analog interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Range: 0 to 14 PH
- Resolution: ± 0.15 PH
- Response time: up to 1 min
- Probe interface: BNC
- Internal resistance: ≤ 250 MΩ
- Error: 0.2 PH
- Supply voltage: 3.3 V or 5 V
Kit contains
- Grove PH Sensor Kit module
- Grove cable
- PH probe
- Sodium chloride solution
583078
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
24h
Available quantity: 26
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
Set with a measuring module and a probe for measuring electrical conductivity. It allows you to measure the salinity of water and soil. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020292
Delivery date unknown
No product available!
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
Low-power, 12 V brushed DC motor combined with a 171.79:1 metal spur gearbox with integrated 48 CPR quadrature encoder on the motor shaft, which provides 8245.92 counts per revolution of the gearbox’s output shaft. Pololu 3268
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.33mm and an external diameter of 0.6mm.
Retired
No product available!
No product available!
RF module - receiver; FSK modulation; Sensitivity -98dBm; Frequency 868MHz, RoHS, HOPE MICROELECTRONICS. HM-R868S
Delivery date unknown
No product available!
No product available!
The switch module has a relay with a control function via a WiFi network. It can be connected to a WiFi network or act as a stand-alone access point. Shelly 1 Open Source
Retired
No product available!
No product available!
Set with a measuring module and a probe for measuring the pH in aqueous solutions. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020291