- Out-of-Stock
Grove PH Sensor Kit - analog pH meter
ID: 583078
Set with a measuring module and a probe for measuring the pH in aqueous solutions. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020291
Description
Set with a measuring module and a probe for measuring the pH in aqueous solutions. It enables measurement in the range from 0 to 14 pH (accuracy 0.15 pH) and a response time of approx. 1 minute. The electrode is connected to the measuring module via the BNC connector. It is made of a sensitive low impedance diaphragm. The module has a quick response and good thermal stability. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the analog interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Range: 0 to 14 PH
- Resolution: ± 0.15 PH
- Response time: up to 1 min
- Probe interface: BNC
- Internal resistance: ≤ 250 MΩ
- Error: 0.2 PH
- Supply voltage: 3.3 V or 5 V
Kit contains
- Grove PH Sensor Kit module
- Grove cable
- PH probe
- Sodium chloride solution
583078
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
24h
Available quantity: 28
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
Set with a measuring module and a probe for measuring electrical conductivity. It allows you to measure the salinity of water and soil. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020292
Delivery date unknown
No product available!
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
No product available!
Module with 4 relays controlled by the I2C interface. Each relay can switch currents up to 40 A at 28-380 V AC. SparkFun KIT-16833
Retired
No product available!
Banana PI BPI-M2 Ultra is the open source hardware platform, Banana PI BPI-M2 Ultra is a quad-core cortex -A7 CPU ,use Allwinner R40 design, it support WIFI+BT on board.and support SATA interface on board
Retired
No product available!
Insulated fibre-optic probe with a measurement range of up to 2500 V. Operates up to 350 MHz and can be connected to an oscilloscope via a BNC connector. Battery-powered. Micsig OIP350B
Retired
No product available!
Dov M. Gabbay, Paul Thagard, John Woods, Andrew Irvine
Delivery date unknown
No product available!
No product available!
No product available!
No product available!
Assembled programmed event counter, equipped with the ability to remember the result, audible signaling
pass the impulse and the executive system with the relay. AVT1824 C
Retired
No product available!
No product available!
No product available!
The assembled and activated module is designed to control differently colored LEDs. AVTMOD02
Retired
No product available!
The ShiftBrite V2.0 is an RGB LED module with a built-in driver featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple modules can easily be chained together and controlled from a single microcontroller to create large LED displays.
Retired
No product available!
Fully Integrated, Hall Effect-Based Linear Current Sensor IC
with 3 kVRMS Voltage Isolation and a Low-Resistance Current Conductor, +-50A, -40C - 125C, Allegro Microsystems, RoHS
Retired
No product available!
Adafruit 800 - Netduino Go! Starter Pack (Modular .NET microcontroller)
Retired
No product available!
No product available!
Set with a measuring module and a probe for measuring the pH in aqueous solutions. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020291