Jetson Xavier NX Dev Kit 16 GB with NVIDIA Carmel ARMv8.2 CPU and 16 GB RAM - Waveshare 22588
ID: 1182573
zł4,554.14
Tax included
zł3,702.55 tax excl.
NVIDIA kit with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics. It has LPDDR4 16GB RAM memory, Ethernet interface, DisplayPort, HDMI and MIPI-CSI camera connectors. Waveshare JETSON-XAVIER-NX-16G-DEV-KIT-EU
Description
NVIDIA development kit with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics consisting of 384 CUDA cores and 48 Tensor cores. The system is supported by LPDDR4 RAM memory with a capacity of 16 GB, eMMC memory 16 GB, Ethernet interface, DisplayPort, HDMI and MIPI-CSI camera connectors. The user has at his disposal a 40-pin GPIO connector with color markings and M.2 Key E and M.2 Key M connectors, to which WiFi network cards and an SSD drive are connected (both modules are included in the set). A dedicated fan is responsible for proper heat dissipation.
The suite offers accelerated computing performance of up to 21 TOPS, allowing it to run modern neural networks in parallel and process data from multiple high-resolution sensors. 384 NVIDIA CUDA cores, 48 Tensor cores, 6 Carmel ARM CPU cores, and two NVDLA (NVIDIA deep learning accelerator) engines, combined with over 51GB/s memory bandwidth, video encoding and decoding, make Jetson Xavier NX the platform of choice for embedded and edge systems.
Jetson Xavier NX supports multiple power modes, including low power modes for battery-powered systems. However, this does not significantly reduce performance, so it can still be used to support sensors and peripherals, while still allowing the use of the entire NVIDIA software stack. The set includes a power supply (required supply voltage from 9 to 20 V), which allows you to power the module at maximum computing load. In default mode, the device consumes 10 W, in boost mode 15 W.
Jetson Xavier NX is the perfect solution for high-performance AI systems such as commercial robots, medical devices, smart cameras, high-resolution sensors, automated optical inspection systems, and other AIoT embedded systems.
The manufacturer offers extensive support in the form of numerous examples and documentation. More information can be found e.g. on the product wiki page.
Compared to the original NVIDIA Jetson Xavier NX Development Kit, Waveshare introduces several improvements and changes:
- The set is available in a version with 8 GB or 16 GB of RAM
- The module has a built-in eMMC memory with a capacity of 16 GB
- 128GB NVMe SSD
- Different model of WiFi adapter
- Color coded GPIO connector
Features
Jetson Xavier NX module
- GPU: NVIDIA Volta™ with 384 NVIDIA® CUDA® cores and 48 Tensor cores
- CPU: Six-core 64-bit NVIDIA Carmel ARM®v8.2 processor, 6 MB L2 + 4 MB L3
- GU accelerator: 2 NVDLA engines
- Video Accelerator: Seven-way video processor in VLIW architecture
- Memory: 16 GB, 128-bit LPDDR4x with a bandwidth of 51.2 GB/s
- 16 GB eMMC memory
- 2 x 4K @ 30 video encoding 6 x 1080p @ 60 | 14 x 1080p @ 30 (H.265 / H.264)
- Video decoding 2 x 4K @ 60 | 4 x 4K @ 30 | 12 x 1080p @ 60 | 32 x 1080p @ 30 (H.265) | 2 x 4K @ 30 | 6 x 1080p @ 60 | 16 x 1080p @ 30 (H.264)
Carrier board
- Connection to Jetson Xavier NX
- 260-pin SO-DIMM connector
- USB
- USB 2.0 Micro B (device only)
- USB 3.1 (Gen2) hub to 4x Type A (host only)
- Gigabit Ethernet (RJ45 connector with PoE and LEDs)
- Display
- HDMI ™ Type A (v2.0a / b)
- VESA® DisplayPort ™ (v1.4)
- Camera connectors
- 2x 15 position flex connectors
- CSI (2.5 Gb / s per pair): 1, x2 (each connector)
- CLK camera, I2C and control
- M.2 key of E.
- PCIe (Gen3) x1 Lane, USB 2.0
- I2S, UART, I2C
- M.2 Key M connector
- PCIe (Gen4) x4 path, control
- Expansion connector
- 40-pin (2x20) header
- I2C (x2), SPI (x2), UART
- I2S, audio clock, GPIO, PWM
- User interface and indicators
- Button header: power, reset and forced recovery
- Power LEDs
- Debugging/serial interface
- Fan connector: 5 V, PWM and tach
- Optional spare RTC battery basket
- Optional CAN connector (5 MHz)
- Power
- DC jack: 9-20 V (19 V power supplied)
- Optional PoE and Ehternet backpower
- 5.0 V main power supply: TPS53015
- 3.3 V main power supply: TPS53015J
- 1.8 V main power supply: TLV70018
- 3.3 V AO power supply (always on): GS7116S5
- USB VBUS supplies: AP22811AW5-7 (x2)
- HDMI 5V power switch: APL3552ABI-TRG
- HDMI 3.3V power supply: GS7616CS-R
- DP 3.3V power switch: APL3552ABI-TRG
- Operating temperature range: from 0 to 35⁰C
- Dimensions: 103 x 90.5 x 31 mm
Kit contains
- NVIDIA Jetson Xavier NX module
- Base board
- Cooling fan
- Power supply
- WiFi card
- SSD NVMe 128 GB
1182573
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
NVIDIA module with the NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics consisting of 384 cores supporting CUDA technology and 48 Tensor cores. The system is supported by DDR4 RAM with a capacity of 8 GB, DisplayPort interface, HDMI, USB 3.1, PCIe and MIPI-CSI cameras 900-83668-0000-000.
zł3,528.54
Delivery date unknown
No product available!
Set with HQ camera, HDMI adapter, 6 mm wide-angle lens and tripod. It works with all versions of Raspberry Pi with a CSI socket. ArduCAM B0241
zł736.49
Delivery date unknown
No product available!
A cooling kit in the form of a fan with an aluminum heat sink dedicated to the minicomputer NVIDIA Jetson Xavier NX. Seeed Studio 114992746
zł136.31
24h
Available quantity: 5
Available
Minicomputer with built-in NVIDIA Jetson Xavier NX module, 128 GB SSD disk and WiFi module with antenna. Closed in a metal housing. Seeed Studio 102110637
zł6,094.18
Delivery date unknown
No product available!
NVIDIA kit with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics. It has LPDDR4 8GB RAM memory, Ethernet interface, DisplayPort, HDMI and MIPI-CSI camera connectors. Waveshare JETSON-XAVIER-NX-8G-DEV-KIT-EU
zł4,799.00
Delivery date unknown
No product available!
Other products in the same category (16)
reComputer J4011 with Jetson Orin NX 8GB offers up to 70 TOPS of AI performance and a rich set of interfaces in a compact enclosure. A platform designed for deployments in robotics, image analysis, and systems utilizing generative AI models. Seeed Studio 110110144
zł3,586.29
4 weeks
No product available!
reServer J3010 is a fanless NVR server with a Jetson Orin Nano 4GB module, designed for AI applications in industry, surveillance, and video analytics systems. It offers high processing performance, a wide range of interfaces, and the ability to integrate with IP cameras and IoT systems at the network edge. Seeed Studio 114110250
zł4,230.59
4 weeks
No product available!
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB and HDMI output. Waveshare JETSON-NANO-LITE-DEV-KIT
zł1,249.00
4 weeks
No product available!
reServer J4012 is an edge server with NVIDIA Jetson Orin NX 16GB offering 100 TOPS performance, designed for video analytics and AI applications in surveillance and IoT systems. Thanks to its fanless design and rich interfaces, it enables reliable operation in industrial applications and environments requiring high stability. Seed Studio 114110247
zł6,460.14
4 weeks
No product available!
Minicomputer with built-in NVIDIA Jetson Xavier NX module with 8 GB RAM. In an aluminum housing, it has the JetPack installed. Seeed Studio 110061381
zł4,799.00
4 weeks
No product available!
A development kit dedicated to creating modern solutions based on artificial intelligence. It consists of a Jetson Orin Nano Super 8GB module and a base board that can connect to all versions of Orin Nano and Orin NX modules. It is an ideal platform for creating prototypes of next-generation edge-AI products. NVIDIA 945-13766-0005-000
zł1,689.00
24h
Available quantity: 30
Available
reComputer Mini J3011 with Jetson Orin Nano 8GB is a compact AI computer with performance of up to 40 TOPS, optimized for use in mobile devices and battery-powered systems. Equipped with flexible interfaces, remote management support, and preinstalled JetPack 6.0, it enables rapid deployment in robotics, drones, and autonomous machines. Seeed Studio 102110999
zł3,048.35
4 weeks
No product available!
Seeed Studio reComputer J4011B with Jetson Orin NX 8GB provides AI performance up to 70 TOPS, a compact design, and a rich set of interfaces. Thanks to the built-in SSD, ready-to-use JetPack environment, and long-term support, the product is a solid platform for the development and deployment of artificial intelligence-based systems, including robotics, video analytics, and automation. Seeed Studio 114993488
zł3,734.51
4 weeks
No product available!
Minicomputer with built-in NVIDIA Jetson Xavier NX module, 128 GB SSD disk and WiFi module with antenna. Closed in a metal housing. Seeed Studio 102110637
zł6,094.18
4 weeks
No product available!
The reComputer J401 board Seeed Studio 102110769 offers extensive functionality for Jetson Orin Nano and Orin NX modules, providing a rich set of communication interfaces and expansion options. It is suitable for AI projects requiring high computing power, such as video analytics, vision systems, and autonomous mobile robots. Seeed Studio 102110769
zł809.60
4 weeks
No product available!
reComputer Mini J3011 with Jetson Orin Nano 8GB and expansion board provides up to 40 TOPS of AI power and a rich set of interfaces, including up to 8 USB ports, dual CAN channel, and Gigabit Ethernet. A compact platform designed for applications in robotics, drones, and battery-powered systems, enabling scalable AI deployments at the edge. Seeed Studio 114993551
zł3,608.70
4 weeks
No product available!
Mini base plate included with the NVIDIA Jetson Nano module. It offers basic connectors, including M.2 Key B, 40-pin GPIO, Ethernet, USB, CSI and HDMI output. It has compact dimensions, making it ideal for projects with limited space. Included with accessories: fan, AC8265 WiFi/BLE module and antennas. Waveshare JETSON NANO MINI KIT A (EU)
zł1,793.89
4 weeks
No product available!
Minicomputer with a built-in NVIDIA Jetson Orin NX module with 16 GB RAM. It is equipped with numerous connectors and communication ports and a pre-installed NVIDIA JetPack package. Seeed Studio 110110145
zł5,322.95
4 weeks
No product available!
reComputer Super J4012 with Jetson Orin NX 16GB offers performance up to 157 TOPS and a wide range of interfaces in a compact form, ready for operation in industrial environments. Dedicated to edge AI applications such as robotics, image processing, and autonomous systems. Seeed Studio 114110314
zł4,960.77
4 weeks
No product available!
reComputer Mini Carrier Board provides full compatibility with Jetson Orin Nano and Orin NX as well as support for a wide range of sensors and interfaces, essential for UAV and UGV systems. Its compact design, wide power input range, and expandability with wireless communication make it an optimal platform for mobile AI applications. Seeed Studio 114993592
zł483.24
4 weeks
No product available!
Seeed Studio A608 Carrier Board is a carrier board for Jetson Orin NX and Orin Nano modules, offering a rich set of interfaces, support for wired and wireless networks, and broad compatibility with robotics peripherals. It is well-suited for applications such as AMRs, AI vision analytics, and generative AI systems. Seeed Studio 105110001
zł1,087.09
4 weeks
No product available!
NVIDIA kit with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics. It has LPDDR4 16GB RAM memory, Ethernet interface, DisplayPort, HDMI and MIPI-CSI camera connectors. Waveshare JETSON-XAVIER-NX-16G-DEV-KIT-EU