Jetson Xavier NX Dev Kit 8 GB with NVIDIA Carmel ARMv8.2 CPU and 8 GB RAM - Waveshare 22589
ID: 1182574
zł4,799.00
Tax included
zł3,901.63 tax excl.
NVIDIA kit with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics. It has LPDDR4 8GB RAM memory, Ethernet interface, DisplayPort, HDMI and MIPI-CSI camera connectors. Waveshare JETSON-XAVIER-NX-8G-DEV-KIT-EU
Description
NVIDIA development kit with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics consisting of 384 CUDA cores and 48 Tensor cores. The system is supported by LPDDR4 RAM memory with a capacity of 8 GB, eMMC memory 16 GB, Ethernet interface, DisplayPort, HDMI and MIPI-CSI camera connectors. The user has at his disposal a 40-pin GPIO connector with color markings and M.2 Key E and M.2 Key M connectors, to which WiFi network cards and an SSD drive are connected (both modules are included in the set). A dedicated fan is responsible for proper heat dissipation.
The suite offers accelerated computing performance of up to 21 TOPS, allowing it to run modern neural networks in parallel and process data from multiple high-resolution sensors. 384 NVIDIA CUDA cores, 48 Tensor cores, 6 Carmel ARM CPU cores, and two NVDLA (NVIDIA deep learning accelerator) engines, combined with over 51GB/s memory bandwidth, video encoding and decoding, make Jetson Xavier NX the platform of choice for embedded and edge systems.
Jetson Xavier NX supports multiple power modes, including low power modes for battery-powered systems. However, this does not significantly reduce performance, so it can still be used to support sensors and peripherals, while still allowing the use of the entire NVIDIA software stack. The set includes a power supply (required supply voltage from 9 to 20 V), which allows you to power the module at maximum computing load. In default mode, the device consumes 10 W, in boost mode 15 W.
Jetson Xavier NX is the perfect solution for high-performance AI systems such as commercial robots, medical devices, smart cameras, high-resolution sensors, automated optical inspection systems, and other AIoT embedded systems.
The manufacturer offers extensive support in the form of numerous examples and documentation. More information can be found e.g. on the product wiki page.
Compared to the original NVIDIA Jetson Xavier NX Development Kit, Waveshare introduces several improvements and changes:
- The set is available in a version with 8 GB or 16 GB of RAM
- The module has a built-in eMMC memory with a capacity of 16 GB
- 128GB NVMe SSD
- Different model of WiFi adapter
- Color coded GPIO connector
Features
Jetson Xavier NX module
- GPU: NVIDIA Volta™ with 384 NVIDIA® CUDA® cores and 48 Tensor cores
- CPU: Six-core 64-bit NVIDIA Carmel ARM®v8.2 processor, 6 MB L2 + 4 MB L3
- GU accelerator: 2 NVDLA engines
- Video Accelerator: Seven-way video processor in VLIW architecture
- Memory: 8 GB, 128-bit LPDDR4x with a bandwidth of 51.2 GB/s
- 16 GB eMMC memory
- 2 x 4K @ 30 video encoding 6 x 1080p @ 60 | 14 x 1080p @ 30 (H.265 / H.264)
- Video decoding 2 x 4K @ 60 | 4 x 4K @ 30 | 12 x 1080p @ 60 | 32 x 1080p @ 30 (H.265) | 2 x 4K @ 30 | 6 x 1080p @ 60 | 16 x 1080p @ 30 (H.264)
Carrier board
- Connection to Jetson Xavier NX
- 260-pin SO-DIMM connector
- USB
- USB 2.0 Micro B (device only)
- USB 3.1 (Gen2) hub to 4x Type A (host only)
- Gigabit Ethernet (RJ45 connector with PoE and LEDs)
- Display
- HDMI ™ Type A (v2.0a / b)
- VESA® DisplayPort ™ (v1.4)
- Camera connectors
- 2x 15 position flex connectors
- CSI (2.5 Gb / s per pair): 1, x2 (each connector)
- CLK camera, I2C and control
- M.2 key of E.
- PCIe (Gen3) x1 Lane, USB 2.0
- I2S, UART, I2C
- M.2 Key M connector
- PCIe (Gen4) x4 path, control
- Expansion connector
- 40-pin (2x20) header
- I2C (x2), SPI (x2), UART
- I2S, audio clock, GPIO, PWM
- User interface and indicators
- Button header: power, reset and forced recovery
- Power LEDs
- Debugging/serial interface
- Fan connector: 5 V, PWM and tach
- Optional spare RTC battery basket
- Optional CAN connector (5 MHz)
- Power
- DC jack: 9-20 V (19 V power supplied)
- Optional PoE and Ehternet backpower
- 5.0 V main power supply: TPS53015
- 3.3 V main power supply: TPS53015J
- 1.8 V main power supply: TLV70018
- 3.3 V AO power supply (always on): GS7116S5
- USB VBUS supplies: AP22811AW5-7 (x2)
- HDMI 5V power switch: APL3552ABI-TRG
- HDMI 3.3V power supply: GS7616CS-R
- DP 3.3V power switch: APL3552ABI-TRG
- Operating temperature range: from 0 to 35⁰C
- Dimensions: 103 x 90.5 x 31 mm
Kit contains
- NVIDIA Jetson Xavier NX module
- Base board
- Cooling fan
- Power supply
- WiFi card
- SSD NVMe 128 GB
1182574
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Set with HQ camera, HDMI adapter, 6 mm wide-angle lens and tripod. It works with all versions of Raspberry Pi with a CSI socket. ArduCAM B0241
zł736.49
Delivery date unknown
No product available!
Arducam 12MP*2 Synchronized Stereo Camera Bundle Kit - Dual IMX477 Camera Kit for Jetson Nano and...
A set with two IMX477 cameras with a resolution of 12 MP and an expansion module for Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0265N
zł1,454.43
Delivery date unknown
No product available!
Mini camera module with IMX477 HQ sensor for NVIDIA Jetson Nano and Xavier NX. Equipped with a lens with an M12 mount with a viewing angle of 75°. ArduCAM B0251
zł305.03
24h
Available quantity: 6
Available
A cooling kit in the form of a fan with an aluminum heat sink dedicated to the minicomputer NVIDIA Jetson Xavier NX. Seeed Studio 114992746
zł136.31
24h
Available quantity: 5
Available
Minicomputer with built-in NVIDIA Jetson Xavier NX module, 128 GB SSD disk and WiFi module with antenna. Closed in a metal housing. Seeed Studio 102110637
zł6,094.18
Delivery date unknown
No product available!
NVIDIA kit with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics. It has LPDDR4 16GB RAM memory, Ethernet interface, DisplayPort, HDMI and MIPI-CSI camera connectors. Waveshare JETSON-XAVIER-NX-16G-DEV-KIT-EU
zł4,554.14
Delivery date unknown
No product available!
Other products in the same category (16)
reComputer Mini J4012 is a compact, flexible high-performance AI platform, enabling the deployment of generative AI applications, video analysis, and autonomous systems in robotics, drones, and intelligent edge devices. Seeed Studio 114993553
zł5,066.68
4 weeks
No product available!
Minicomputer with built-in NVIDIA Jetson Xavier NX module, 128 GB SSD disk and WiFi module with antenna. Closed in a metal housing. Seeed Studio 102110637
zł6,094.18
4 weeks
No product available!
reServer Industrial J501 is an industrial-grade mainboard for Jetson AGX Orin, offering up to 275 TOPS of AI performance and a wide range of communication interfaces. With support for GMSL cameras, 10G Ethernet, and M.2 slots, it enables the development of advanced robotic, analytical, and industrial systems with edge AI capabilities. Seeed Studio 102991854
zł1,787.55
4 weeks
No product available!
reComputer Super J4012 with Jetson Orin NX 16GB offers performance up to 157 TOPS and a wide range of interfaces in a compact form, ready for operation in industrial environments. Dedicated to edge AI applications such as robotics, image processing, and autonomous systems. Seeed Studio 114110314
zł4,960.77
4 weeks
No product available!
reComputer J3011B with the NVIDIA Jetson Orin Nano 8GB module offers AI performance of up to 67 TOPS in super mode and an extensive set of interfaces for wired and wireless communication. A compact solution for deployments in smart city systems, industry, and energy. Seeed Studio 114993487
zł3,194.04
4 weeks
No product available!
Seeed Studio A608 Carrier Board is a carrier board for Jetson Orin NX and Orin Nano modules, offering a rich set of interfaces, support for wired and wireless networks, and broad compatibility with robotics peripherals. It is well-suited for applications such as AMRs, AI vision analytics, and generative AI systems. Seeed Studio 105110001
zł1,087.09
4 weeks
No product available!
reComputer J3010B with NVIDIA Jetson Orin Nano 4GB provides up to 34 TOPS of AI power in super mode and a wide range of interfaces for system expansion. A solution dedicated to applications in smart city, power systems, and industrial automation. Seeed Studio 114993486
zł2,633.68
4 weeks
No product available!
The reComputer J202 board Seeed Studio 102991695 provides full support for Jetson Xavier NX, Nano, and TX2 NX modules, offering a wide range of communication interfaces, connectors, and expansion options. It is well-suited for AI applications requiring intensive computing, such as vision systems and mobile robotics. Seeed Studio 102991695
zł690.36
4 weeks
No product available!
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB and HDMI output. Waveshare JETSON-NANO-LITE-DEV-KIT
zł1,249.00
4 weeks
No product available!
reComputer J4011 with Jetson Orin NX 8GB offers up to 70 TOPS of AI performance and a rich set of interfaces in a compact enclosure. A platform designed for deployments in robotics, image analysis, and systems utilizing generative AI models. Seeed Studio 110110144
zł3,586.29
4 weeks
No product available!
reComputer Mini J3011 with Jetson Orin Nano 8GB is a compact AI computer with performance of up to 40 TOPS, optimized for use in mobile devices and battery-powered systems. Equipped with flexible interfaces, remote management support, and preinstalled JetPack 6.0, it enables rapid deployment in robotics, drones, and autonomous machines. Seeed Studio 102110999
zł3,048.35
4 weeks
No product available!
NVIDIA development kit with Jetson Nano module. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB and HDMI output. Comes with Bluetooth and WiFi Dual Mode module, IMX219-77 camera and LCD display. Waveshare JETSON-NANO-LITE-DEV-KIT-C-EU
zł1,507.27
4 weeks
No product available!
The reComputer J401 board Seeed Studio 102110769 offers extensive functionality for Jetson Orin Nano and Orin NX modules, providing a rich set of communication interfaces and expansion options. It is suitable for AI projects requiring high computing power, such as video analytics, vision systems, and autonomous mobile robots. Seeed Studio 102110769
zł809.60
4 weeks
No product available!
Kit with NVIDIA Jetson Xavier NX module (with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics). It has LPDDR4 8GB RAM memory, Ethernet interface, HDMI and MIPI-CSI camera connectors. A 128GB SSD is included. Auvidea JNX30D-NX8-128GB
zł4,598.99
2 weeks
No product available!
Seeed Studio reComputer J4011B with Jetson Orin NX 8GB provides AI performance up to 70 TOPS, a compact design, and a rich set of interfaces. Thanks to the built-in SSD, ready-to-use JetPack environment, and long-term support, the product is a solid platform for the development and deployment of artificial intelligence-based systems, including robotics, video analytics, and automation. Seeed Studio 114993488
zł3,734.51
4 weeks
No product available!
The reComputer J101 board Seeed Studio 102991694 provides a functional and compact environment for working with Jetson Nano, offering a rich set of ports and support for multiple communication standards. It is well-suited for projects in mobile robotics, video analytics, and image processing with artificial intelligence. Seeed Studio 102991694
zł345.17
4 weeks
No product available!
NVIDIA kit with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics. It has LPDDR4 8GB RAM memory, Ethernet interface, DisplayPort, HDMI and MIPI-CSI camera connectors. Waveshare JETSON-XAVIER-NX-8G-DEV-KIT-EU