Module with 5 colored buttons

A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567

The 4x4 Membrane Keyboard Module with 16 Buttons is compatible with Raspberry Pi, Arduino, AVR and other microcontrollers. It is lightweight, durable and easy to assemble, making it ideal for various electronics projects. ModKB4x4

Keyboard module with 16 buttons in the form of a 4x4 matrix. Equipped with an 8-pin connector with 2.54 mm pitch

SEN-14520

8-position DIP-Switch Module

Module with a button and red LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044

5-button keyboard module with analog output

Waveshare 8 Push Buttons module provides 8 single push buttons in 1 board. Waveshare 3678

KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.

Conductivity Sensor Switch DFRobot is a touch button that allows you to change the sensor output status by connecting terminals (positive and negative) using metal, human body or fruit and plants. It is powered by 3.3 ... 5 V. DFRobot SEN0223

Module with a button, LED diode and a blue cap. DFRobot DFR0029-B

Module with a button, LED diode and a yellow cap. DFRobot DFR0029-Y

Module with AT42QT1060 controller - contectless keyboard controller, Kamami, RoHS.

Module with 12-position rotary switch. It is supplied with the voltage ranging from 3.3 V to 12 V and has an analog output (Gravity connector). DFRobot SEN0156

Membrane keypad module with 12 (3x4) buttons. It is equipped with a tape terminated with a 7-pin connector

Module with a button and blue LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-B