zł228.28 tax excl.
Visible spectrum emitter module that combines 9 discrete LEDs covering visible light wavelengths from 455 to 720 nm. It uses Qwiic connectors and I2C communication as well as a USB type C socket to power the module. SparkFun SPX-21316
Visible spectrum emitter module that combines 9 discrete LEDs covering visible light wavelengths from 455 to 720 nm. Each LED emits light with a narrow peak wavelength, except for the phosphor-based green LED in the middle of the spectrum. The board is based on the MultiSpecLED design by Ben Krasnow. The design uses weaker LEDs and places them closer together. The user also has Qwiic connectors and I2C communication with the LP55231 LED controller. The built-in USB Type-C receptacle allows you to connect a high-current 5V power supply to the LEDs, and the exposed copper on the back is sized for a self-adhesive copper heatsink for applications where additional cooling may be needed. The LEDs can be run to about 80% PWM fill without the need for cooling, but above that a heat sink is required. Examples and the Arduino library are available for the module.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
SparkFun Qwiic kit. Contains 10 wires of different lengths and tips. It allows you to connect Qwiic modules to a programming platform or to a prototype board. SparkFun KIT-15081
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
A module dedicated to projects related to traffic lights and pedestrian crossings. It is fully assembled, which eliminates the need for soldering. Thanks to the shape resembling a real traffic light and three LEDs powered directly from the micro:bit I/O pins, it allows easy programming and expansion of projects with additional traffic lights using radio communication, which allows for the study of traffic management in the city. Kitronik 5642
Kitronik 2712 is a red LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.
Module with replaceable LED diodes in 4 colors: red, green, blue and white. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020228
Module with green LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-G
A small module for learning how to solder. It allows you to build a small device with two LEDs that turn on when the light intensity changes
Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745
No product available!
Module with white LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-W
A set of 10 mini modules with addressable RGBW Neopixel LEDs. The diodes are controlled using a popular single-wire interface, and their design allows the modules to be connected in series. Adafruit 4776
LED display module with three LEDs in red, yellow and green. Perfect to be used as a traffic light
RGB Pixels are digitally-controllable lights you can set to any color, or animate. Adafruit 322
No product available!
Module with blue LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030010
The WS2813B PLCC-6 LED diode integrates an RGB chip and controller in a single 5050 package, supports a dual signal line with transmission continuity function, and a 24-bit color depth. Used in lighting installations, peripheral devices, and multimedia systems.
Adafruit 2226
Gravity: Digital LED String Lights (Warm White) consist of a series of warm white LEDs. It is powered by a voltage of 2.5 ... 5 V and consists of 40 LEDs placed on a 4-meter cable. DFRobot DFR0448
No product available!
Module with two white diodes. Dedicated to Voron 3D printers as hotend and printing nozzle lighting
HK Yellow 16 LED Circular Light Board with Lead (28511)
Visible spectrum emitter module that combines 9 discrete LEDs covering visible light wavelengths from 455 to 720 nm. It uses Qwiic connectors and I2C communication as well as a USB type C socket to power the module. SparkFun SPX-21316