New products
New products New products
zł1,569.76
4 weeks
zł79.78
24h
Available
Available
SenseCAP Solar Node P1 for Meshtastic - Solar-powered LoRa and Meshtastic module
ID: 1198710
5902186322561
zł379.84
Tax included
zł308.81 tax excl.
Solar-powered communication node integrating LoRa modules and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel, which makes it ideal for field work. Thanks to its long range (up to 8-9 km) and the possibility of expansion via Grove interface, P1 will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993643
Description
The SenseCAP Solar Node P1 is a self-powered communication node with solar energy supply, designed for use in remote or off-grid environments. It integrates the XIAO nRF52840 Plus microcontroller and the Wio-SX1262 LoRa module, enabling long-range communication with ultra-low power consumption. Preloaded with Meshtastic firmware, the device is ready to use straight out of the box.
The kit includes a 5W solar panel, making it perfect for outdoor environments. Thanks to the built-in Grove interface, you can easily connect various sensors, making it a versatile monitoring tool. The communication range between two devices can reach up to 8–9 km in open terrain. The device can act as a field node, relay, or an expansion point for a Meshtastic network, significantly extending its coverage. It is ideally suited for environmental monitoring, IoT applications, field exploration, and emergency communication.
Features
- Main controller: XIAO nRF52840 Plus (ARM Cortex-M4, 64 MHz, 256KB RAM, 1MB Flash + 2MB external memory)
- LoRa module: Wio-SX1262 (Semtech SX1262, up to 22 dBm transmit power, 868–915 MHz)
- Antenna LoRa: rod antenna, 2 dBi, 868–915 MHz
- Bluetooth: 5.0
- Solar panel: 5W
- Interfaces: 1x Grove (IIC/GPIO/UART), USB-C for debugging
- Buttons: Power, Reset, Programmable
- LED indicators: Charging (x2), Solar panel status (x1), Mesh signal (x1), Programmable (x1)
- Power input: USB-C 5V 1A or solar panel 5V 1A
- Operating environment: -40°C ~ +60°C
- Certifications: CE, FCC
- Dimensions: 191.2 x 201.2 x 42.1 mm
Kit contents
- SenseCAP Solar Node P1
- Mounting kit (ball joint, connector, clamp, mounting ring)
- Rod antenna 2 dBi 868–915 MHz x1
- RF cable: RP-SMA male to RF-SMA female (300mm)
- USB-C cable (black)
- User manual
1198710
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Intelligent image sensor with LoRaWAN communication dedicated to applications such as image recognition, people counting, object detection, etc. Supports TensorFlow Lite models. Seeed Studio 101990962
zł379.00
24h
Available quantity: 2
Available
Wireless data logger with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition from sensors with RS485 interface, GPIO or analog output. Seeed Studio 114992872
zł319.00
24h
Available quantity: 1
Available
Wireless sensor with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition with a wide measurement range of temperature from -40°C to 85°C and humidity from 0 to 100% RH. Seeed Studio 114992867
zł336.96
24h
Available quantity: 3
Available
The SenseCAP M2 Multi-Platform LoRaWAN Indoor Gateway is a universal LoRaWAN® gateway supporting network servers such as AWS, TTN and ChirpStack, operating in the 865-923 MHz (EU868) bands. It offers a range of up to 10 km and stable data transmission, ideal for applications in smart buildings, environmental monitoring and precision agriculture. Seeed Studio 114992981
zł469.00
Delivery date unknown
No product available!
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł229.00
Delivery date unknown
No product available!
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
zł269.80
24h
Available quantity: 3
Available
Other products in the same category (16)
The HLK-L06 module is a compact 433 MHz LoRa solution for wireless data transmission in IoT applications. modHK-L06
zł23.90
24h
Available quantity: 6
Available
DFRobot DFR1115-868 module based on the SX1262 enables stable long-range wireless communication in IoT networks, supporting LoRa and LoRaWAN. It operates in the EU868 band, offering low power consumption, full compatibility with popular platforms, and easy integration through I2C/UART interfaces. It is well-suited for agricultural, environmental, and educational applications.
zł62.05
24h
Available quantity: 4
Available
These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x\'s). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900 MHz to the Internet or your mobile device. Adafruit 3232
zł113.70
24h
Available quantity: 1
Available
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M
zł66.84
4 weeks
No product available!
Core1262-HF is an advanced LoRa module operating in the 850–930 MHz band, combining high energy efficiency, strong transmission power, and interference resistance. With support for LoRa/LoRaWAN standards and available development resources, it is ideal for use in industrial automation, smart home systems, and Sub-GHz IoT projects.
zł30.27
24h
Available quantity: 31
Available
LoRa MESH Radio Module is a radio module with an operating frequency of 868MHz. Communication with the module takes place via the UART serial interface. It has a range up to 3km. It is supplied with voltage in the range of 3.3-5V. DFRobot TEL0117
zł253.34
24h
Available quantity: 2
Available
A compact IoT device that combines an ESP32S3 processor with a Wio-SX1262 LoRa module, enabling communication distances of up to 5 km in the 868–915 MHz band. With support for LoRaWAN, 2.4 GHz Wi-Fi, Bluetooth 5.0, and expansion options for GNSS and sensors, it is a versatile solution for IoT gateways and nodes. Seeed Studio 113110064
zł101.07
4 weeks
No product available!
Shield with RFM95W 915 MHz system for LoRa/LoRaWAN communication, designed for Arduino boards. SHIELD-LORA-RFM Citron
zł131.01
24h
Available quantity: 2
Available
Radio module with operating frequency of 433 MHz. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.3 to 5 V. DFRobot TEL0114
zł225.78
24h
Available quantity: 1
Available
LoRa module working on the 868 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23240
zł362.46
24h
Available quantity: 2
Available
Versatile ESP32 module with LoRa and Wi-Fi support, designed for monitoring people flow and creating mesh networks in difficult conditions, such as in areas cut off from the network. The device can detect Wi-Fi and Bluetooth signals, allowing estimation of the number of mobile devices in the environment without recording MAC addresses, which protects privacy. The module offers low power consumption, data storage on SD card and data transfer via LoRa WAN or MQTT, making it a reliable and self-sufficient solution for emergency communication. modTTGO LoRa32 v2.1
zł148.90
4 weeks
No product available!
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
zł255.85
24h
Available quantity: 1
Available
Open source USB dongle that allows you to work with the LoRa network. It allows you to communicate with a range of up to 5 km and has a built-in 1.14-inch LCD display. SB Components 23004
zł212.21
24h
Available quantity: 2
Available
Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers a ready-to-use, no-programming, power supply from USB-C, solar panel or battery, and a 1.3" OLED display for real-time monitoring. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it is a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993648
zł152.84
4 weeks
No product available!
Cap for use with shallow Feather series, with radio module RFM95W 900MHz. It offers a range of up to 2 kilometers (the range can be increased by using an external antenna). It has a SPI interface. Adafruit 3231
zł113.66
24h
Available quantity: 2
Available
Function module designed for MicroMod boards. It allows you to add LoRa and LoRaWAN wireless communication in the 915 MHz frequency band to the project. SparkFun DEV-18573
zł245.27
24h
Available quantity: 1
Available
Solar-powered communication node integrating LoRa modules and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel, which makes it ideal for field work. Thanks to its long range (up to 8-9 km) and the possibility of expansion via Grove interface, P1 will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993643