SenseCAP Solar Node P1-Pro for Meshtastic - Solar-powered LoRa and Meshtastic module
ID: 1198715
5902186322592
zł493.53
Tax included
zł401.24 tax excl.
Solar-powered communication node integrating LoRa, GPS and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel and four 18650 batteries, which ensures reliable operation even in limited sunlight and makes it ideal for field work. Thanks to its long range (up to 8-9 km), support for many navigation systems and the possibility of expansion via the Grove interface, the P1-Pro will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993633
Description
SenseCAP Solar Node P1-Pro is a self-sustaining communication node powered by solar energy, designed to operate in areas without traditional network access. It integrates a XIAO nRF52840 Plus main controller, Wio-SX1262 LoRa module, and XIAO L76K GPS module, enabling precise positioning and long-range communication with minimal power consumption. Thanks to the built-in Meshtastic software, the device is ready to use straight out of the box.
Equipped with a 5W solar panel and four 18650 batteries, each with a capacity of 3350mAh, the node ensures continuous operation even in low sunlight conditions. It is ideal for outdoor environments where reliable power is essential. The GPS module provides accurate real-time location data, supporting GPS, GLONASS, and Galileo systems. With the included Grove interface, connecting various sensors is simple, making this device an extremely versatile monitoring tool. The communication range between two devices can reach up to 8–9 km in open terrain. The device can serve as a field node, repeater, or expansion point for the Meshtastic network, effectively extending its range. It is perfect for environmental monitoring, IoT applications, field exploration, and emergency communication.
Features
- Main controller: XIAO nRF52840 Plus (ARM Cortex-M4, 64 MHz, 256KB RAM, 1MB Flash + 2MB additional memory)
- LoRa module: Wio-SX1262 (Semtech SX1262, transmit power up to 22dBm, 868–915 MHz)
- GPS module: XIAO L76K (supports GPS/GLONASS/Galileo/BeiDou)
- Antennas:
- LoRa: rod antenna, 2 dBi, 868–915 MHz
- GNSS: GPS L1 (1575.42 MHz), GLONASS L1 (1602 MHz), BeiDou B1 (1561.098 MHz)
- Bluetooth: 5.0
- Solar panel: 5W
- Interfaces: 1× Grove (IIC/GPIO/UART), USB-C for debugging
- Buttons: power on/off, reset, programmable
- LED indicators: charging (×2), solar panel status (×1), mesh signal (×1), programmable (×1)
- Power input: USB-C 5V 1A or solar panel 5V 1A
- Battery: 4× 18650 rechargeable batteries (3350 mAh each)
- Operating environment: -40°C to +60°C
- Certifications: CE, FCC
- Dimensions: 191.2 × 201.2 × 42.1 mm
Kit contains
- SenseCAP Solar Node P1-Pro (with GPS and batteries)
- Mounting kit (ball connector, adapter, clamp, mounting ring)
- Rod antenna 2 dBi 868–915 MHz ×1
- RF cable RP-SMA male to RF-SMA female (300 mm)
- Black USB-C cable
- User manual
1198715
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Intelligent image sensor with LoRaWAN communication dedicated to applications such as image recognition, people counting, object detection, etc. Supports TensorFlow Lite models. Seeed Studio 101990962
zł469.04
24h
Available quantity: 2
Available
Wireless data logger with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition from sensors with RS485 interface, GPIO or analog output. Seeed Studio 114992872
zł444.62
24h
Available quantity: 1
Available
Wireless sensor with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition with a wide measurement range of temperature from -40°C to 85°C and humidity from 0 to 100% RH. Seeed Studio 114992867
zł341.89
24h
Available quantity: 3
Available
ireless sensor with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition with a wide light intensity measurement range from 0 to 160000 Lux. Seeed Studio 114992868
zł389.68
24h
Available quantity: 1
Available
Wireless sensor with LoRaWAN network communication. Dedicated to long-distance industrial data acquisition with a wide measurement range of CO2 from 400 to 10000 ppm, temperature from -40°C to 85°C and humidity from 0 to 100% RH. Seeed Studio 114992869
zł858.71
24h
Available quantity: 1
Available
Other products in the same category (16)
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091
zł97.81
24h
Available quantity: 1
Available
The module with the SX127x 433 MHz system for LoRa communication, designed for FireBeetle boards. It communicates via the SPI interface. DFRobot TEL0121
zł93.69
4 weeks
No product available!
These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x\'s). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900 MHz to the Internet or your mobile device. Adafruit 3232
zł113.70
24h
Available quantity: 1
Available
LoRa module based on Semtech SX1262 chip, supporting 868/915 MHz band and providing stable operation thanks to the use of TCXO. It is characterized by transmit power up to 22 dBm, receiver sensitivity -136.73 dBm and low power consumption, which makes it ideal for battery-powered IoT devices. Seeed Studio 114993390
zł29.26
4 weeks
No product available!
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
zł479.63
4 weeks
No product available!
LoRa MESH Radio Module is a radio module with an operating frequency of 868MHz. Communication with the module takes place via the UART serial interface. It has a range up to 3km. It is supplied with voltage in the range of 3.3-5V. DFRobot TEL0117
zł253.34
24h
Available quantity: 2
Available
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. Designed for surface mounting. Seeed Studio 317990687
zł50.16
24h
Available quantity: 8
Available
A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 868 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-HF-B
zł74.10
4 weeks
No product available!
LoraSX1278 radio module operating in the 433 MHz band, using LoRa technology for long-range wireless data transmission, ideal for IoT applications requiring stable and reliable communication. It enables bidirectional transmission with a frame acknowledgement mechanism and connects to microcontrollers via the SPI interface, which facilitates integration with platforms such as Arduino. Thanks to high sensitivity (-148 dBm), transmitter power up to +20 dBm and support for various modulations, the module provides flexibility and efficiency in various applications.
zł25.69
24h
Available quantity: 1
Available
A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 433 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-LF-B
zł78.98
24h
Available quantity: 4
Available
Radio module with operating frequency of 433 MHz. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.3 to 5 V. DFRobot TEL0114
zł225.78
24h
Available quantity: 1
Available
LoRa module working on the 868 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23240
zł389.92
24h
Available quantity: 1
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł107.45
24h
Available quantity: 4
Available
LoRa radio module with 433 MHz operating frequency. Communication takes place via the SPI serial interface. It is supplied with the voltage of 3.3 V
zł14.69
24h
Available quantity: 21
Available
Shield with RFM95W 915 MHz system for LoRa/LoRaWAN communication, designed for Arduino boards. SHIELD-LORA-RFM Citron
zł131.01
24h
Available quantity: 2
Available
LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 850 to 930 MHz. Waveshare RP2040-LoRa-HF
zł56.63
24h
Available quantity: 3
Available
Solar-powered communication node integrating LoRa, GPS and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel and four 18650 batteries, which ensures reliable operation even in limited sunlight and makes it ideal for field work. Thanks to its long range (up to 8-9 km), support for many navigation systems and the possibility of expansion via the Grove interface, the P1-Pro will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993633