SenseCAP Solar Node P1 for Meshtastic - Solar-powered LoRa and Meshtastic module
ID: 1198710
5902186322561
zł379.84
Tax included
zł308.81 tax excl.
Solar-powered communication node integrating LoRa modules and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel, which makes it ideal for field work. Thanks to its long range (up to 8-9 km) and the possibility of expansion via Grove interface, P1 will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993643
Description
The SenseCAP Solar Node P1 is a self-powered communication node with solar energy supply, designed for use in remote or off-grid environments. It integrates the XIAO nRF52840 Plus microcontroller and the Wio-SX1262 LoRa module, enabling long-range communication with ultra-low power consumption. Preloaded with Meshtastic firmware, the device is ready to use straight out of the box.
The kit includes a 5W solar panel, making it perfect for outdoor environments. Thanks to the built-in Grove interface, you can easily connect various sensors, making it a versatile monitoring tool. The communication range between two devices can reach up to 8–9 km in open terrain. The device can act as a field node, relay, or an expansion point for a Meshtastic network, significantly extending its coverage. It is ideally suited for environmental monitoring, IoT applications, field exploration, and emergency communication.
Features
- Main controller: XIAO nRF52840 Plus (ARM Cortex-M4, 64 MHz, 256KB RAM, 1MB Flash + 2MB external memory)
- LoRa module: Wio-SX1262 (Semtech SX1262, up to 22 dBm transmit power, 868–915 MHz)
- Antenna LoRa: rod antenna, 2 dBi, 868–915 MHz
- Bluetooth: 5.0
- Solar panel: 5W
- Interfaces: 1x Grove (IIC/GPIO/UART), USB-C for debugging
- Buttons: Power, Reset, Programmable
- LED indicators: Charging (x2), Solar panel status (x1), Mesh signal (x1), Programmable (x1)
- Power input: USB-C 5V 1A or solar panel 5V 1A
- Operating environment: -40°C ~ +60°C
- Certifications: CE, FCC
- Dimensions: 191.2 x 201.2 x 42.1 mm
Kit contents
- SenseCAP Solar Node P1
- Mounting kit (ball joint, connector, clamp, mounting ring)
- Rod antenna 2 dBi 868–915 MHz x1
- RF cable: RP-SMA male to RF-SMA female (300mm)
- USB-C cable (black)
- User manual
1198710
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Intelligent image sensor with LoRaWAN communication dedicated to applications such as image recognition, people counting, object detection, etc. Supports TensorFlow Lite models. Seeed Studio 101990962
zł379.00
24h
Available quantity: 2
Available
Wireless data logger with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition from sensors with RS485 interface, GPIO or analog output. Seeed Studio 114992872
zł319.00
24h
Available quantity: 1
Available
Wireless sensor with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition with a wide measurement range of temperature from -40°C to 85°C and humidity from 0 to 100% RH. Seeed Studio 114992867
zł336.96
24h
Available quantity: 3
Available
The SenseCAP M2 Multi-Platform LoRaWAN Indoor Gateway is a universal LoRaWAN® gateway supporting network servers such as AWS, TTN and ChirpStack, operating in the 865-923 MHz (EU868) bands. It offers a range of up to 10 km and stable data transmission, ideal for applications in smart buildings, environmental monitoring and precision agriculture. Seeed Studio 114992981
zł469.00
Delivery date unknown
No product available!
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł229.58
24h
Available quantity: 1
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
zł269.80
24h
Available quantity: 3
Available
Other products in the same category (16)
LoRaWAN SX1303 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1303 868M LoRaWAN Gateway (B)
zł581.15
4 weeks
No product available!
Function module designed for MicroMod boards. It allows you to add LoRa and LoRaWAN wireless communication in the 915 MHz frequency band to the project. SparkFun DEV-18573
zł245.27
24h
Available quantity: 1
Available
Transceiver module based on LoRa modulation technique. It operates in the ISM 868/915MHz band, offering extremely low reception sensitivity of -136dBm and increased output power of +30dBm. Hoperf RFM95PW-868S2
zł45.90
24h
Available quantity: 5
Available
A single-channel IoT gateway operating in the 868 MHz band, designed for building and testing long-range LoRaWAN networks. Based on the ESP32 WROOM-32 microcontroller, the device offers WiFi and Ethernet connectivity and works with the RA-01H radio module, providing communication distances of up to approximately 1.5 km outdoors. The gateway supports the LoRaWAN 1.0.3 standard and is compatible with The Things Network platform, enabling easy cloud integration. It features a built-in color TFT display, USB-C power supply, and an acrylic enclosure.
zł149.90
24h
Available quantity: 3
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł106.85
24h
Available quantity: 6
Available
LoRaWAN node module based on the RP2040 chip and the LR1262 radio module, enabling communication in the 868 MHz band. It supports point-to-point (LoRa P2P) transmission and LoRaWAN networks, making it ideal for IoT projects. Equipped with Crowtail connectors, a battery charging interface, and the ability to be powered by a solar panel, it allows for the creation of autonomous and energy-efficient field devices. Compatibility with Arduino and MicroPython facilitates rapid prototyping and application development. Elecrow LR1262 Node Board LoRaWan Node
zł80.18
24h
Available quantity: 3
Available
LoRa module operating at 433 MHz based on the SX1262 chip. It allows to realize long-range wireless data transmission. Waveshare Core1262-LF
zł34.29
24h
Available quantity: 2
Available
LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116
zł230.50
4 weeks
No product available!
HAT module with RFM95W 433 MHz system for LoRa / LoRaWAN communication and OLED display, designed for Raspberry Pi minicomputers. Adafruit 4075
zł200.64
24h
Available quantity: 1
Available
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
zł255.85
4 weeks
No product available!
LoRa radio module with 433 MHz operating frequency. Communication takes place via the SPI serial interface. It is supplied with the voltage of 3.3 V
zł14.69
24h
Available quantity: 14
Available
LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 850 to 930 MHz. Included with a USB Type-C adapter. Waveshare RP2040-LoRa-HF-Kit
zł57.07
4 weeks
No product available!
DFRobot DFR1115-915 module with the SX1262 chip enables energy-efficient, long-range LoRa and LoRaWAN communication in the US915 band. It provides compatibility with popular software and hardware platforms, making it suitable for IoT projects in agriculture, education, and environmental and industrial monitoring.
zł62.05
24h
Available quantity: 4
Available
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. Designed for surface mounting. Seeed Studio 317990687
zł39.61
24h
Available quantity: 8
Available
The HLK-L06 module is a compact 433 MHz LoRa solution for wireless data transmission in IoT applications. modHK-L06
zł23.90
24h
Available quantity: 4
Available
An expansion module for the Wio Terminal development board, which features LoRa-E5 and Quectel L76-LB modules to provide LoRaWan and GNSS network communication. It allows the construction of compact IoT projects. Seeed Studio 114992728
zł186.89
24h
Available quantity: 2
Available
Solar-powered communication node integrating LoRa modules and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel, which makes it ideal for field work. Thanks to its long range (up to 8-9 km) and the possibility of expansion via Grove interface, P1 will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993643