- Out-of-Stock
M5Stack M5StickC PLUS - IoT development kit with ESP32-PICO module
ID: 582001
5906623494569
A compact development kit from the M5StickC series equipped with an ESP32 Pico. Equipped with a display, it will work in IoT-related projects, as a STEM educational tool or in "wearable" devices. M5Stack K016-P
Description
The M5StickC PLUS is a compact development kit from the M5StickC series equipped with an ESP32 Pico. ESP32 is a module with a dual-core 32-bit Xtensa 240 MHz LX6 processor, with Wi-Fi and Bluetooth communication and 4 MB of Flash memory.
The M5StickC set has a USB type C interface, which is used for charging, programming and serial communication, an integrated 1.14 "screen and a built-in RTC module. The module is powered by a 120 mAh battery, which is managed by the AXP192 system. M5StickC PLUS also has two programming buttons, microphone, IMU sensor MPU6886 and the ability to communicate in infrared.An additional GPIO pins are also available to the user.
The M5StickC PLUS can be programmed via Arduino and UIFlow (using Blockly, MicroPython language). The set will be perfect for IoT-related projects, as a STEM educational tool or for "wearable" devices. Full documentation of the set and guides are available on the manufacturer's website.
Features
- ESP32: 240 MHz, Dual Core, 600 DMIPS, 520 KB SRAM, Wi-Fi, Bluetooth
- Flash 4 MB
- Interface: USB type C, GROVE (I2C + I/O + UART)
- LCD TFT 1.14 ", 135x240 px, ST7789v2
- GPIO pins
- Red LED
- 2 x Button
- IMU MPU6886 sensor
- IR communication
- SPM1423 microphone
- RTC BM8563
- PMU AXP192
- Battery 120 mAh 3.7 V
- Antenna 2.4G 3D antenna
- Housing: PC
- Power supply: 5 V/500 mA
- Operating temperature: 0°C to 40°C
- Dimensions: 48.2 x 25.5 x 13.7 mm
- Weight: 15 g
582001
Data sheet
- Microcontroller
- ESP32
- Flash memory
- 4 MB
- Number of I/O
- 01
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- Yes
- MicroSD slot
- No
- Length
- 48,2 mm
- Width
- 25,5 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.71
24h
Available quantity: 33
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
24h
Available quantity: 47
Available
M5Stack series development kit equipped with ESP32 Pico. It will work in IoT-related projects or in "wearable" devices. M5Stack C008
zł48.07
24h
Available quantity: 6
Available
M5Stack series development kit equipped with ESP32 Pico. Equipped with a 5x5 RGB LED matrix, it will work in IoT-related projects or in "wearable" devices. M5Stack C008-B
zł84.89
24h
Available quantity: 1
Available
Other products in the same category (16)
No product available!
Universal card with 16 relays - set for self-assembly
Retired
No product available!
LCD 4x20, 98x60mm, LED backlight (WHITE), FSTN, enhanced temperature range, cyryllic, Pb-free, backlight current I=60mA (U=5V)
Retired
No product available!
Flexible Qwiic cord with a length of 165 mm. On one side it is terminated with a Qwiic female connector, and on the other side with single goldpin female connectors. SparkFun CAB-22726
Retired
No product available!
No product available!
This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. It\'s affordable but sounds great! The NXP UDA1334A is a jack-of-all-I2S-trades: you can use 3.3V - 5V logic levels (a rarity), and can process multiple different formats by setting two pins to high or low. Adafruit 3678
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.84mm internal diameter and 1,26mm outside diameter
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba
Retired
No product available!
No product available!
No product available!
No product available!
FiberFlex 30D is a flexible filament ideal for projects requiring high flexibility and resistance to bending, crushing and stretching. Its rubber-like structure makes it suitable for creating seals, sports accessories, spare parts and toys. Due to the printing requirements, it is recommended to use a direct extruder and reduce the printing speed and extruder pressure force. Fiberlogy FiberFlex 30D Gray
Retired
No product available!
No product available!
Nylon Spacer: 25mm Length, 5mm OD, 3.3mm ID (10-Pack)
Retired
No product available!
No product available!
No product available!
A compact development kit from the M5StickC series equipped with an ESP32 Pico. Equipped with a display, it will work in IoT-related projects, as a STEM educational tool or in "wearable" devices. M5Stack K016-P