Lanyard for ThinkNode M1/M5 - Elecrow

Solar-powered communication node integrating LoRa modules and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel, which makes it ideal for field work. Thanks to its long range (up to 8-9 km) and the possibility of expansion via Grove interface, P1 will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993643

Compact and energy-efficient solution combining Bluetooth 5.0 and LoRa (862–930 MHz), ideal for IoT projects requiring long range and low power consumption. It uses the XIAO nRF52840 MCU with Cortex-M4 core and support for multiple interfaces and the LoRa SX1262 module for reliable wireless communication. The kit is perfect for applications such as Meshtastic, asset tracking, sensor networks or educational projects. Seeed Studio 102010710

A comprehensive development kit for creating mobile and energy-efficient LoRa® devices with GPS support and environmental sensors. The kit includes a development board with nRF52840 and Semtech LR1110, an Air530 GPS module and a 0.96” OLED display, ready to work with Meshtastic software. With support for Bluetooth 5.3, Zigbee, Thread and four Grove connectors, the kit offers extensive expansion possibilities and full freedom to design independent communication and location systems. Seeed Studio E24070201

Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers ready-to-go operation without programming, powered by USB-C, solar panel or battery. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it proves to be a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993653

Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers a ready-to-use, no-programming, power supply from USB-C, solar panel or battery, and a 1.3" OLED display for real-time monitoring. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it is a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993648

Solar-powered communication node integrating LoRa, GPS and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel and four 18650 batteries, which ensures reliable operation even in limited sunlight and makes it ideal for field work. Thanks to its long range (up to 8-9 km), support for many navigation systems and the possibility of expansion via the Grove interface, the P1-Pro will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993633

A mobile LoRa transceiver compatible with Meshtastic and MeshCore, equipped with GPS supporting GPS, GLONASS, BeiDou, and QZSS. The device utilizes a powerful ESP32-S3 microcontroller and SX1262 transceiver, ensuring stable, long-range communication in the 868 MHz band. The 1.54" EPD screen allows for convenient data display with very low power consumption, and the 1200 mAh battery ensures long operation in the field. Elecrow ThinkNode M5 Walkie-Talkie

A LoRa transceiver with an nRF52840 processor and an SX1262 radio, offering stable field communication and full Meshtastic and MeshCore compatibility. The device is equipped with a GPS module supporting GPS, GLONASS, BeiDou, and QZSS, and a clear 1.54" EPD display, ideal for operation in direct sunlight. A 1200 mAh battery provides over 48 hours of operation, and an external RP-SMA antenna allows for greater range and better signal quality. Elecrow ThinkNode M1 Walkie-Talkie

An ESP32-S3 HMI display with a dual-core 240 MHz Xtensa LX7 processor, offering fast performance and extensive wireless connectivity via Wi-Fi and Bluetooth 5.0. The 3.5-inch IPS screen with a resolution of 480x320 provides excellent image quality and precise capacitive touch. The device supports AI features such as speech recognition and synthesis, as well as RTC, battery charging, audio, and an SD card slot. Compatibility with the Arduino IDE, ESP-IDF, and LVGL enables the rapid development of modern IoT interfaces and applications. Elecrow CrowPanel Advance 3.5"

Charging accessory for the Card Tracker T1000-E in the form of a PCBA board with six magnetic cables, designed for simultaneous charging of multiple devices. Seeed Studio 114993534

ThinkNode M3 tracker based on the Meshtastic protocol, equipped with GPS, WiFi, BLE and LoRa 868MHz, designed for indoor and outdoor positioning with Meshtastic app support. Elecrow ThinkNode M3 Tracker Card

ThinkNode M6 Outdoor Solar Power is an outdoor IoT node for Meshtastic and MeshCore networks, based on the nRF52840, supporting GPS and LoRa 868 MHz. The device features a 6 W solar power system with MPPT, an integrated battery, and Bluetooth connectivity, enabling long-term autonomous operation in harsh outdoor conditions. An ideal solution for mesh communication, environmental monitoring, and off-grid applications. Elecrow LMM14106D

A multi-functional device combining a 7000 mAh power bank with LoRa communication based on the Meshtastic protocol, enabling the creation of a decentralized mesh network without internet access. Equipped with a Semtech LR1110 module, an nRF52840 microcontroller, and built-in GPS supporting multiple navigation systems, it allows for messaging and real-time location sharing. It offers fast charging up to 22.5W, PD, QC, and PPS support, and MagSafe-compatible wireless charging. Elecrow LMM14004D1

The ThinkNode M7 gateway is designed for building stationary Meshtastic network nodes with LoRa communication in the EU868. The ESP32-S3 and LR1110 provide LoRa, 2.4 GHz WiFi and Bluetooth 5.0 connectivity. A 10/100 Mbps Ethernet port with IEEE 802.3af PoE enables wired communication and power delivery over a single cable, while the USB Type-C port provides a 5 V power supply. The pre-installed gateway functionality simplifies deployment in communication networks. Elecrow ThinkNode M7 Meshtastic

ThinkNode M2 Meshtastic (LoRa) enables long-range communication using LoRa technology and Meshtastic firmware. The device is equipped with an ESP32-S3 microcontroller, an SX1262 LoRa module, a 1.3-inch OLED display with 128 × 64 px resolution, 2.4 GHz WiFi, Bluetooth 5.0 Low Energy, and a USB Type-C connector. The transceiver is compatible with the Meshtastic App, also supports MeshCore firmware, and is suitable for emergency communications, mesh networking, and IoT applications. Elecrow ThinkNode M2 Meshtastic (LoRa)

Compact communication platform based on a dual-core ESP32-S3 processor, designed for building LoRa Mesh networks, IoT projects, and embedded systems. The device features a 1.14" LCD display, a 56-key keyboard, and advanced audio capabilities with a microphone, speaker, and 3.5 mm audio output. The design is fully based on the Cardputer-Adv platform and extends its functionality with the Cap LoRa-1262 module, adding LoRa communication and GNSS positioning with support for GPS, BeiDou, Galileo, and GLONASS. A built-in accelerometer, infrared transmitter, microSD card slot, and Grove interfaces allow easy expansion and sensor integration, while the 1750 mAh Li-ion battery provides mobility and extended operating time. M5Stack K152