![68RPM 6V N20 - miniature gear motor inverted 68RPM 6V N20 - miniature gear motor inverted](https://kamami.pl/39333-large_default/n20f-12v-68-rpm.jpg)
![68RPM 6V N20 - miniature gear motor inverted 68RPM 6V N20 - miniature gear motor inverted](https://kamami.pl/39333-large_default/n20f-12v-68-rpm.jpg)
zł22.89 tax excl.
Small metal gear motor, rotation speed 68 RPM, operating voltage 6 V. GA1024-N20F-0036
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it achieves a speed of 68 RPM and a maximum torque of 1.4 kg * cm, consuming a current from 0.055 A to 0.58 A.
The recommended supply voltage for the motors is 3 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
All N20F engines have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 15 g.
![]() |
Dimensions of N20F micromotors (units in mm). |
---|
Our offer includes N20F engines with gear ratios from 50: 1 to 200: 1.
Gear ratio |
Version | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
50:1 | MP | 6 V | 381 RPM | 0,4 kg*cm | 55 mA | 0,58 A | LINK |
150:1 | MP | 6 V | 136 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK |
200:1 | MP | 6 V | 68 RPM | 1,5 kg*cm | 55 mA | 0,58 A | LINK |
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
![]() |
![]() |
![]() |
DC motor controller with DRV8838 Pololu system | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with the DRV8835 chip |
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
![]() |
![]() |
![]() |
Current sensor module 0-5A with ACS712-05 chip | Current sensor module ± 5A with ACS714 chip | Current sensor module ± 15.5A with ACS711EX system |
No product available!
A small, low-power motor with a 5:1 metal gear, 6 V operating voltage, 0.02 A to 0.36 A power consumption, 2500 RPM speed and a maximum torque of 0.05 kg * cm. Pololu 1100
No product available!
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
10:1 Micro Metal Gearmotor HP with Extended Motor Shaft
No product available!
Miniature, 12V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4786
A small, low-power motor with a 210:1 metal gear, 6 V operating voltage, 0.02 A to 0.36 A current consumption, 65 RPM, a maximum torque of 1.6 kg*cm and a double-sided shaft. Pololu 2206
No product available!
Small metal gear motor, 100 RPM speed, 3V operating voltage. GA12-N20-0005
Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054
250:1 Micro Metal Gearmotor
298:1 Micro Metal Gearmotor with Extended Motor Shaft
50:1 Micro Metal Gearmotor with Extended Motor Shaft
No product available!
A small low-power motor with a 380:1 metal gear, 6 V operating voltage, 0.02 A to 0.36 A power consumption, 36 RPM speed and a maximum torque of 2.9 kg*cm. Pololu 4790
No product available!
Miniature high-power motor from the Pololu MP series. 100: 1 gear motor,
the rotation speed of the shaft is 220 rpm, the torque is 1.5 kg * cm (0.15 Nm).
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2381
Pololu high power miniature motor with carbon brushes. 150:1 gear motor, shaft speed 220 rpm, torque 1,8kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3053
Small metal gear motor, rotation speed 68 RPM, operating voltage 6 V. GA1024-N20F-0036