New products
New products
€16.39
24h
Available
€16.63
24h
Available
€16.39
24h
Available
Available
€19.04
24h
Available
€16.39
24h
Available
€16.63
24h
Available
€16.39
24h
Available
Available
€19.04
24h
Available
136RPM 6V N20F - miniature gear motor inverted
ID: 582321
5906623459520
€6.80
Tax included
€5.53 tax excl.
Small metal gear motor, rotation speed 136 RPM, operating voltage 6 V. GA1024-N20F-0037
Description
A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it achieves a speed of 136 RPM and a maximum torque of 1.1 kg * cm, consuming a current from 0.055 A to 0.58 A.
Features
- Motor type: medium power (MP)
- Gear ratio: 200:1
- Supply voltage: 3-9 V
- Speed: 136 RPM
- Maximum torque: 1,1 kg*cm
- Minimum current consumption: 0,055 A
- Maximum current consumption: 0,58 A
Attention!
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Supply voltage
The recommended supply voltage for the motors is 3 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
Dimensions and weight
All N20F engines have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 15 g.
 |
| Dimensions of N20F micromotors (units in mm). |
|---|
Types and parameters of N20F engines:
Our offer includes N20F engines with gear ratios from 50: 1 to 200: 1.
| Gear ratio |
Version | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
| 50:1 | MP | 6 V | 381 RPM | 0,4 kg*cm | 55 mA | 0,58 A | LINK |
| 150:1 | MP | 6 V | 136 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK |
| 200:1 | MP | 6 V | 68 RPM | 1,5 kg*cm | 55 mA | 0,58 A | LINK |
Motor controllers
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
 |
 |
 |
| DC motor controller with DRV8838 Pololu system | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with the DRV8835 chip |
Current sensors
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
 |
 |
 |
| Current sensor module 0-5A with ACS712-05 chip | Current sensor module ± 5A with ACS714 chip | Current sensor module ± 15.5A with ACS711EX system |
582321
Data sheet
- DC motor power
- MP
- Gear material
- Metal
- Gear ratio
- 150:1
- Rotation speed
- 136 RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Nie
- Power supply voltage
- 6V
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A small, high-power motor with a 50: 1 metal gear, 6 V operating voltage, 0.1 A to 1.5 A power consumption, 650 RPM, a maximum torque of 0.74 kg * cm and carbon brushes with increased durability. Pololu 3063
€26.26 6 weeks No product available!
A small medium power motor with 210:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 100 RPM speed and a maximum torque of 1.7 kg*cm. Pololu 2369
€23.35 6 weeks No product available!
A small, low-power motor with a 380: 1 metal gear, 6 V operating voltage, 0.02 A to 0.36 A power consumption, 36 RPM speed, maximum torque of 2.9 kg * cm and double-sided shaft. Pololu 4791
€24.50 6 weeks No product available!
100:1 Micro Metal Gearmotor MP
€20.66 24hAvailable quantity: 2 AvailableThis gearmotor is a miniature medium-power, 6 V brushed DC motor with a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
€23.59 24hAvailable quantity: 1 AvailableMiniature high-power motor from the Pololu MP series. Gear motor 5: 1,
the rotational speed of the shaft is 4400 rpm, the torque is 0.1 kg * cm (0.01 Nm).
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2376€21.69 6 weeks No product available!
75:1 Micro Metal Gearmotor HP with Extended Motor Shaft
€25.76 6 weeks No product available!
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 30 RPM, operating voltage 6 V. GA1036-N20M-0052
€7.19 6 weeks No product available!
No product available!
A small, high-power motor with a 1000: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 35 RPM, a maximum torque of 10 kg * cm and carbon brushes with increased durability. Pololu 3046
€36.22 6 weeks No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
€23.83 24hAvailable quantity: 3 AvailableA high-power miniature Pololu from the HP series. The motor with gear 210:1, shaft speed is 150rpm, torque is 3kg*cm (0.3Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2216
€24.99 24hAvailable quantity: 6 AvailableA small, low-power motor with a 150:1 metal gear, operating voltage of 6 V, power consumption from 0.02 A to 0.36 A, speed of 90 RPM, maximum torque of 1.1 kg*cm and double-sided shaft. Pololu 2205
€24.50 6 weeks No product available!
A small, high-power motor with a 380: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 85 RPM, a maximum torque of 5 kg * cm and carbon brushes with increased durability. Pololu 4798
€26.26 6 weeks No product available!
A small, high-power motor with a 250: 1 metal gear, 6 V operating voltage, 0.1 A to 1.5 A power consumption, 130 RPM, a maximum torque of 3.2 kg * cm and carbon brushes with increased durability. Pololu 3068
€26.26 6 weeks No product available!
15:1 Micro Metal Gearmotor. Pololu 4780
€23.32 24hAvailable quantity: 4 Available
Small metal gear motor, rotation speed 136 RPM, operating voltage 6 V. GA1024-N20F-0037