30RPM 6V N20M - miniature motor with gear and M3 screw
search
  • 30RPM 6V N20M - miniature motor with gear and M3 screw
ID: 582336
5906623459605
zł29.82
Tax included

zł24.24 tax excl.

A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 30 RPM, operating voltage 6 V. GA1036-N20M-0052

24h
Available
Available quantity: 2
 

Free shipping

free shipping in Poland for all orders over 500 PLN

 

Same day shipping

If your payment will be credited to our account by 11:00

 

14 days for return

Each consumer can return the purchased goods within 14 days

Description

Small, metal gear motor with M3 threaded shaft, approx. 55 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it achieves a speed of 30 RPM and a maximum torque of 2,1 kg * cm, consuming a current from 0.055 A to 0.58 A.

Features

  • Motor type: medium power (MP)
  • Gear ratio: 298:1
  • Supply voltage: 3-9 V
  • Speed: 30 RPM
  • Maximum torque: 2,1 kg*cm
  • Minimum current consumption: 0,055 A
  • Maximum current consumption: 0,58 A
Attention!
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.

Supply voltage

The recommended supply voltage for the motors is 6 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.

Dimensions and weight

All N20M engines have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 15 g.

Dimensions of N20M micromotors (units in mm).

Types and parameters of N20M engines:

Our offer includes N20M engines with gear ratios from 50: 1 to 200: 1.

Gear ratio Version Voltage Rotation speed max. torque min. current max. current Link
50:1 MP 6 V 300 RPM 0,4 kg*cm 55 mA 0,58 A LINK
100:1 MP 6 V 200 RPM 0,7 kg*cm 55 mA 0,58 A LINK
150:1 MP 6 V 100 RPM 1,1 kg*cm 55 mA 0,58 A LINK
200:1 MP 6 V 60 RPM 1,4 kg*cm 55 mA 0,58 A LINK
250:1 MP 6 V 50 RPM 1,8 kg*cm 55 mA 0,58 A LINK
298:1 MP 6 V 30 RPM 2,1 kg*cm 55 mA 0,58 A LINK

Motor controllers

It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.

Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.

DC motor controller with DRV8838 Pololu system Shield Arduino with dual driver for DC motors with A4990 chip Dual driver for DC motors with the DRV8835 chip

Current sensors

Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.

Current sensor module 0-5A with ACS712-05 chip Current sensor module ± 5A with ACS714 chip Current sensor module ± 15.5A with ACS711EX system
582336

Data sheet

DC motor power
MP
Gear material
Metal
Gear ratio
298:1
Rotation speed
30 RPM
Shaft diameter
3 mm
Shaft shape
D
Obustronny wał silnika
Nie
Power supply voltage
3 - 9 V

Other products in the same category (16)