- Out-of-Stock
Manufacturer Part Number : Sandisk SDSDQAD-08G/16G
Interface : UHS-1 SDR50
Sequential Write speed : 10MB/sec
Sequential Read speed : 40MB/sec
Pre-installed Android 5.x or latest version
Storage I/O comparison
The C2 can boot from a MicroSD card or an eMMC module. The MicroSD interface supports the higher performance UHS-1 mode as well. File access of a 512MB file (read/write) on two different storage options shows distinct performance differences. The eMMC 5.0 storage is ~7x faster than the MicroSD Class-10 card in read tests. The MicroSD UHS-1 card is ~2x faster than the MicroSD Class-10 card in read tests. The MicroSD UHS-1 card provides a great low-cost option for many applications!
To obtain the results in the storage I/O comparison graph, type the following lines at a command prompt.
Write speed command :
$ dd if=/dev/zero of=test.tmp oflag=direct bs=8M count=64
Read speed command :
$ dd if=test.tmp of=/dev/null iflag=direct bs=8M count=64
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
OS Preinstalled Flash Memory for ODROID-C2 with Android
OS Preinstalled Flash Memory for ODROID-C2 with Linux
Intelligent Wi-Fi plug. It automatically controls lighting, heating and any other connected electrical appliance. Shelly Plug S
No product available!
No product available!
NetFPGA-SUME Virtex-7 FPGA Development Board. The amazingly advanced board that features one of the largest and most complex FPGA’s ever produced, a Xilinx Virtex-7 690T supporting thirty 13.1 GHz GTH transceivers. 410-301
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
Integrated circuit MC1496 - balanced modulator / demodulator in housing SOIC14, Semiconductor, RoHS
No product available!
Antenna splitter that allows one GNSS antenna to be connected to two devices, such as the NEO-D9S correction data receiver and another GNSS module. The module, based on the BP2G1+ from Mini-Circuits, evenly splits the signal from the antenna port between two outputs, providing power to the active antenna and optionally switchable power supply. SparkFun SPX-21223
No product available!
No product available!
Male terminal block, angled, 12-pin. Pitch 3.81mm. Height 7mm. 15EDGRC
No product available!
OS Preinstalled Flash Memory for ODROID-C2 with Android