- -zł19.57

Metal housing for the NanoPC T4 minicomputer. Easy to install enclosure with an antenna cut-out and USB, HDMI and Ethernet ports. The set includes a set of screws allowing the housing to be assembled with a mini computer.
Attention!
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Minicomputer with an octa-core processor (up to 1.4GHz) and 2 GB of DDR3 RAM memory, 16 GB of eMMC Flash memory. It has a WiFi 2.4G module and video interfaces in the form of HDMI, as well as USB2.0, MicroSD, Ethernet port and 3.5mm audio socket. FriendlyELEC NanoPC T3 Plus
A single board computer with a Cortex-A55 quad-core processor and a Mali-G31 GPU. The set is equipped with 4GB of RAM and a connector for microSD cards and two SATA connectors, as well as an Ethernet, HDMI, USB 2.0 socket. Hardkernel Odroid-HC4
Switched-mode AC Power supply 12V/2A with DC 5.5x2.1 connector and EU plug. It has anti-overload, anti-overvoltage, short circuit protection. Conform to the norm Energy efficiency Level V. Length of output cable is 1.2m
A set with two IMX477 cameras with a resolution of 12 MP and an expansion module for Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0265N
No product available!
VisionSOM-6ULL is comprised of a small processor module with CPU bus accessibility and standard I/O functionality and is an ideal solution for embedded projects.
SLS16Y2_792C_512R_04GE_0SF_E
NanoPi NEO Core Allwinner H3 Quad-Core 1,2Ghz + 256MB RAM
Single Board Computer (SBC) with i.MX 8M mini Quad Core 1.6GHz processor, 4GB RAM and 16GB eMMC. Equipped with numerous interfaces, including Ethernet, RS-485, HDMI ports, 4 x USB 2.0, USB-OTG, MIPI-CSI camera connector and PCIe 2.0 connector, as well as Raspberry Pi compatible GPIO connector. Designed for industrial applications. SoMLabs SLC5X8MMQC_1600C_04GR_16GE_0SF_E
No product available!
Laser acrylic enclosure for the 3.5inch LCD Shield for Odroid C1, Odroid C1+ and Odroid C2. Color: Smoky Blue
Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB and HDMI output. Waveshare JETSON-IO-BASE-LITE
No product available!
The adapter allows you to connect the antenna with the RP SMA 50 Ω female connector to the device with the uFL socket (also known as u.FL, IPEX, IPAX, IPX, MHF, AM). The cord has a length of 20cm
No product available!
Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of a board (module with OLED display, battery basket and motor controller), expansion module with connectors, cameras with Sony IMX219 image sensor, motors, housing and a set of mounting screws. It is also equipped with a 2.4/5 GHz WiFi module and Bluetooth 4.2. Waveshare JetBot AI Kit Accesories
Aluminum housing with a fan dedicated to the LattePanda V1.0 minicomputer. Black colour. DFRobot FIT0530
No product available!
Development kit with an SoC containing eight 64-bit ARM v8.2 cores and a Volta graphics chip consisting of 512 cores supporting CUDA, cuDNN and TensorRT technologies. Equipped with 32 GB RAM and 128 GB SSD drive. Auvidea X221D-AGX32-128GB
No product available!
A baseboard dedicated to NVIDIA Jetson Xavier NX modules. It offers numerous connectors, including M.2 Key E, M.2 Key M, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-B
No product available!
Industrial microSD UHS-1 memory card with a capacity of 16 GB for ODROID N2 with pre-loaded Linux software.
No product available!
10.1" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 1024x600 pixels. Waveshare 10.1inch HDMI LCD (E)
Single board computer with Cortex-A55 quad-core processor and Mali-G52 GPU. The set is equipped with 8GB of RAM and a connector for eMMC memory and microSD cards, as well as an Ethernet, HDMI, USB 3.0 socket. Hardkernel Odroid-M1
No product available!
Metal housing for the NanoPC T4 minicomputer. The set includes a set of screws allowing the housing to be assembled with a mini computer. FriendlyELEC NanoPC-T4