Module with 8 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4448

3-pin cable with a length of 30 cm and 28 AWG. A one-sided JST ZH 3-pin female connector that is compatible with the 3-pin connector of the Sharp GP2Y0A51 analog distance sensors. Polol 2411

Shunt regulator with a constant voltage of 13.2V, bypass resistance 1.33 Ohms and a total of 12 SMT shunt resistors on both sides of the PCB with the possibility of adding an external potentiometer to adjust the preset voltage. Pololu 3770

Shunt regulator with a constant voltage of 13.2V, bypass resistance 1.5Ohm and a total of 32 SMT bypass resistors on both sides of the PCB with the possibility of adding an external potentiometer to adjust the preset voltage. Pololu 3771

The shunt regulator with a constant voltage of 26.4V, bypass resistance 4Ohm and a total of 12 SMT shunt resistors on both sides of the PCB with the possibility of adding an external potentiometer to adjust the preset voltage. Pololu 3774

Shunt regulator with a fixed voltage of 26.4V, bypass resistance of 2.8 Ohms and a total of 32 SMT bypass resistors on both sides of the PCB with the possibility of adding an external potentiometer to adjust the preset voltage. Pololu 3775

Shunt regulator with a constant voltage of 33V, bypass resistance 4Ohm and a total of 12 SMT shunt resistors on both sides of the PCB with the possibility of adding an external potentiometer to adjust the preset voltage. Pololu 3776

The shunt regulator has an adjustable 4 ... 18V voltage, a 1.5 Ohm shunt resistance and a total of 32 SMT bypass resistors on both sides of the PCB. Pololu 3778

Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3441

Micro analog servo with plastic gear. It has a range of motion of 120° and a derived feedback output. Pololu 3436

Module with 16 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4256

Module with 16 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4156